Not many people know but we have an piece of open source software for controlling an Antenna Tracker.  It's been built by Tridge (Arduplane lead developer) for use in the outback challenge.

Sadly we have no documentation and, as far as I know, nobody except Tridge has used it.  Still given Tridge's track record on building great software I suspect it works well and if it doesn't, I'm sure we can fix it.  So to not let this piece of code go to waste, I'd like some help from people who are interested to give it a try and help me figure out how it works.

Here's the little that I know:

  • It runs on any of our supported board (APM1, APM2, PX4, Pixhawk, Flymaple and perhaps VRBrain)
  • For APM1/APM2 users building the code is as easy as opening our hacked ArduinoIDE and selecting File > SketchBook > Tools > AntennaTracker and then building in the normal way.  For PX4/Pixhawk, our autobuilder doesn't automatically build a binary but I can provide one if people are interested.
  • It can control a Pan and Tilt gimbal like this or this found on servocity.com.
  • It may or may not require a GPS
  • It must somehow receive vehicle position updates from the ground station which has the telemetry radio that is connected to the vehicle. Maybe through a USB cable.  Tridge probably uses the python ground station, MAVProxy, to passthrough the vehicle position data to the AT but perhaps we can get MichaelO to build out a similar feature in Mission Planner.
  • I imagine this antenna tracker could also be used to keep a camera focused on the vehicle which might be good for easing the burden on creating videos of our vehicles.

So if you want to give it a try please do and stick any findings, questions or issues below. Alternatively Issues can go into the issues list.

I'll start sticking things into the wiki as they become clear.

Views: 62650

Reply to This

Replies to This Discussion

I only used my APM tracker with CR servos, so I am not able to help you here.

On what hardware/companion computer does Open360tracker work ?

The open360tracker is a hard- and software project. Two members of the fpv-community.de forum designed the mechanics/case and wrote the arduino sketch. They use a Crius SE as the "brain". I run it on a Crius AIO Pro and there is a guy from spain, who ported/adopted it for 32bits on the Naze32 range of boards. It does not use a full IMU, only a compass and an optional GPS. I do not use their mechanics. I use my APM tracker mechanics and changed it to work with the open360tracker software (I also changed the arduino sketch a bit).

So you used this arduino sketch for open360tracker and ported it to APM?

I'm just curious about it - what if we would use this sketch for APM, because it seems it works on Crius SE reliable.

The open360tracker sketch runs on an APM2.5, too. The only APM2.5 I had, had the internal compass disabled, so I did not use it.
I use a Crius Aio Pro which is also powered by an Atmega 2560.

Is there a need to change something in code, if I want to use it with my APM 1.4, or can I directly compile and flash it  into AMP ?

Hello! I am building a very high gain parabolic dish system - I wanted to ask how accurate the antenna tracker is in degrees?

What would be a reasonable maximum gain for a parabolic dish on the antenna tracker? Would 30 db be too much? 

Thanks!

Hello,

Trying deseperatly to make the antenna tracker firmware work, I succeeded so far to make use of SITL to simulate a vehicle to be able to test the real antenna tracker based on the simulated positions of the vehicle.

I use a AUAV-X2 boartd on the antenna tracker (same as Pixhawk) and an external compass. GPS position has been fixed for testing.

I found two blocking issues/bugs in the antenna tracker firmware (in addition to the already known blocking issue the pitch does not track at all):

  • Bug 1 : the reversing of servo movement is without effect. Changing it in the full param list or on the GIU of mission planner does not change the servo rotation direction, rebooting Pixhawk after these change does not solve the issue. Picture below:

  • Bug 2 : Yaw tracking stops after reaching the servo position limits. It is supposed to do a 180 deg reversal, but it does not (I sue 180 deg servos in pitch and yaw). See picture:

These three bugs make antenna tracker firmware currently unusable. There does not seem to be any improvements more development follow up on this firmware, a pity.

I will have a look at the 360openTracker open source solution as an alternative.

Hugues,

I agree with your assessment and I'm glad that you were able to get SITL to simulate a vehicle and test the APM AT.

Hopefully, we just have to be patient and wait a bit longer. Priorities change so it is up to the community to find others that are interested in the project and have the skills to modify the code. Perhaps we will get lucky and Randy or Jacob will return. One other thing you might consider is to open a ticket with your findings using the Github Issue Tracker.

Hi Greg,

Will link this to the Github issue tracker. Thx for the suggestion.

I will compile a summary of my experiments. I can get the tracker to track but only in the positions limits of the servo (no reversal) (maybe it works better with continuous rotation servos ?) and had to discover by trial and errors what works and what does not, including a non documented way of how you physically have to position the external compass versus the moving plate, for the tracker to read a good heading (and I can tell you it is counter intuitive).

So half joy, but already glad I can track in a limited 180 degrees.

I have a tracker that is working well but it has standard servos. I would like to put a continuous rotation on the yaw and keep my standard servo for pitch. Are there parameter settings that will allow this combo?

Also what’s the latest on firmware development? I have been using the custom firmware because the pitch never moves with the latest firmware.

.

I have a tracker that is working well but it has standard servos. I would like to put a continuous rotation on the yaw and keep my standard servo for pitch. Are there parameter settings that will allow this combo?

Also what’s the latest on firmware development? I have been using the custom firmware because the pitch never moves with the latest firmware.

.

 

Reply to Discussion

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service