help wiring 1/3" camera with 2.4Ghz Tx/Rx

i wired it up and there is no picture coming out.

i have wired it with white (video out) to yellow (video in)  and yellow to white and i have
tried crossing them like the wire diagram says and still nothing.

i connected our dvd player to the 4" media player and it worked fine,
so i have eliminated that.

so its either

the wiring, (i have tried different combo's) or
the tx,rx (the small one that goes on the plane get extremely hot ! so
hot you can barely touch it) using a 3s 11.1v battery 750mah

i have tried flipping the channels also. or
the camera itself.

i got a little static through the screen once but thats it. no picture.

can you think of anything else i could try..


You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Moderator
    A TX that runs hot is also indication of a poor ant.

    Many of these units ship with a poorly matched antenna.

    My first unit came with an ant with a swivel... the TX got real hot.

    I noticed on the rcgroups FPV threads that the swivel kind is not recommended.

    I upgraded to a matched one and the TX runs fine and the picture is alot better.
    (only drawback is that the new antenna, being larger, is heavier and has more drag in the airstream)
    Welcome! Future Home of Another Amazing Website Powered By Exabytes
  • Try switching the yellow and white wires, or hooking the camera up directly to the monitor.
This reply was deleted.

Activity

Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
More…