I'm trying to figure out how to get more than just the three mode selections on my APM 2.5 using a Spektrum DX8.  I use ch5 (aux1) to connect to the mode input and since it's a three position switch I get to assign three modes.  So how do you get more than that at a time?  I'm thinking there's something I do on the radio to allow another switch to alter aux1 output and give me three different pulswidths but I haven't figured it out on my own yet.  Any help is appreciated!

Views: 242

Reply to This

Replies to This Discussion

Ask and somebody has probably already asked before... and if you are lucky, found a solution.

HERE is one post.


Thanks RD!  I also was about to come back here and post that I had found some examples using JR radios and was going to try to see if mine would work similar. 

Reply to Discussion


© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service