I'm trying to figure out how to get more than just the three mode selections on my APM 2.5 using a Spektrum DX8.  I use ch5 (aux1) to connect to the mode input and since it's a three position switch I get to assign three modes.  So how do you get more than that at a time?  I'm thinking there's something I do on the radio to allow another switch to alter aux1 output and give me three different pulswidths but I haven't figured it out on my own yet.  Any help is appreciated!

Views: 242

Reply to This

Replies to This Discussion

Ask and somebody has probably already asked before... and if you are lucky, found a solution.

HERE is one post.


Thanks RD!  I also was about to come back here and post that I had found some examples using JR radios and was going to try to see if mine would work similar. 

Reply to Discussion



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service