HOW TO MAINTAIN CONSTANT YAW DURING AUTOMATED FLIGHT

Does anyone know how I can get a multirotor to maintain constant yaw/orientation during an automated flight - i.e. instead of pointing to the next waypoint, I want the platform to maintain a specified orientation throughout the flight. Thanks in advance for any help on this question. 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • T3
    The ROI works with the latest firmware. You just need to set it after each waypoints.
  • I have not tested ROI for a few iterations of the firmware but it was working as far as I recall in 2.8 or 2.9

    Yaw parameters are provided in the waypoint settings in your flight plan.

    Again, I am only going by what values are there, I have not personally tested these functions lately.

    This will be on the cards when 3.1 is released as I am waiting for the CAM_TRIG_DIST, which will be in 3.1, to be able to rethink current flight plans.

  • In Mission Planner-Config/Tuning-Advanced Params - scroll to the bottom and change the 'Yaw behaviour during mission' to what you want.

This reply was deleted.

Activity