Replies

  • Thanks Chris! I carefully reviewed both links but unfortunately the are all for the Mega 1280/2560. There is no version there that will work with the Atmega 328. 

    I found and old manual fort this board and says that the code was  an ArduPilot 2.3 version. Does someone have copy or link to that source code?

    thanks!

  • 3D Robotics

    There is some very ancient code here and here

    Google Code Archive - Long-term storage for Google Code Project Hosting.
  • Greg: it will be of great help if you can get hold of the old source code and send it to me. Thanks in advance
  • Thanks for your response Greg. I have the gps and other stuff. The firmware on the board was replaced by other application and I want to have the board working again for teaching purposes.
  • First I must ask, why bother with one of those. Do you have thermopile sensors or a imu sensor board. I flew one of these a back in those days. Had 3 axis thermopile and GPS and 2 way telemetry. I may still have a copy of the firmware that I modified.

    I still have the hardware and a custom ground station based on the 328. 

This reply was deleted.

Activity

xemone liked Max Gilson's profile
Aug 31
nick rymer left a comment on ArduCopter User Group
"I recently switched laptops and now have Windows 10. I installed Mission Planner on my laptop and plugged a mRo SiK Telemetry Radio into the USB port. The radio is not recognized on the com ports but is instead on the "Other Devices" tab in Device…"
Aug 20
More…