Long Endurance

I want to build a fixed wing drone with the longest possible endurance possible. I'm thinking electric pusher(for aerial video) with solar panels and alternator(s) to charge the batteries. I have very little experience in building fixed wings but have extensive experience with multi and single rotors. And also with aerial video/photography. It can be over 55lbs, since im willing to get FAA experimental licencing for it. Im also planing on using an airport hangar so it should be large enough to be seen by small aircraft such as cessnas. The wingspan should also be around 30-40ft. And if we have to go to a gas motor, it would have to be an aviation motor being able to use AA or Jet-A fuel.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi Matt,

    I just wanted to point out that in my opinion, your notion of building a larger craft to increase safety is flawed.

    You are vastly more likely (by some huge order of magnitude) to have your plane crash due to pilot or mechanical error than have a mid-air collision with another craft.

    The mass of your craft will generally be proportional to the cube of its size.  The cruising speed will also go up.  That means the total energy in the impact with the ground for a plane twice as big will be around 8-20 times as great.  That will make it much more likely to harm or kill people and damage property.

    I understand that safety is a concern for you, I also believe it's the concern of most people here and why you've seen some strong reactions. Please don't fly anything of significant size over people or their property.

    Starting small will be much safer in practice and I'm sure you'll learn things along the way.

  • T3

    @Pedals2Paddles

    I am not a moderator, but these sorts of comments should not be welcome here. That is a downright attack. I don't know how long you have been on DIYD, but this sort of thread is extremely common, and lets face it most of these types of projects will not come to fruition. However, lots of interesting ideas have come from the speculation and ideas that comes in this type of thread. 

    I have been following this thread from the start simply to see if I could learn something or get a cool idea for my own projects. This thread has not been a waste, but sparked the interest of many. Your constant negative comments have done nothing but detracted from this thread and multiple rules of this site. If you do not want to "waste your time" on threads like this...don't participate. 

    • Ted, you shouldn't post unless you're adding to the discussion.

      This thread is one for the lameness record books.  It saddens me to see people waste so much breath on what was obviously a BS thread from the beginning.

      To anyone dumb enough to take this thread seriously... I simultaneously feel sorry for you and think you got what you deserve.  However, it would be very rude to begrudge anyone their chance to bitch over this debacle.

    • If this was my initial reply without giving him a chance, you'd be correct.  If this was just about a kid having big dreams, you'd be correct.  But that's not what this is.

      This is now 11 pages of him not listening to a single thing anyone is telling him.  He's lied to us about having a budget.  He's lied to us about his intent.  He's deceived us acting like this is legit project.  None of which is true.  It's not fair to the membership here that his deception continue.

      I find his claim of having "over 200 hours" and that he paid for most of them to be highly suspect. I can't claim it's untrue, just highly suspect.  That is about $30,000 worth of aircraft rental, fuel, and instructor time.  So unless he just so happens to have a plane and an instructor in the family, there is some BS here.  Furthermore, he claims he has no allowance, and he's too young to have a job.  Math failure on paying for "most" of that himself. 

  • Great thread! I hope you succeed!

    I know it doesn't exactly fit your specs but I think this would be the easiest way to start. Put some LED strobes on it and other visual assistance.

    https://www.youtube.com/watch?v=mCiqnBmzSUs#t=13

    YouTube
    • T3

      I don't know exactly how much fuel that thing carries, but if you traded 1 gallon of it for payload you could easily carry the DSLR/thermal payload. Very cool demonstration of what is easily possible with today's readily available technology. 

      • ive been looking at that one for a while

        • Penguin C is a great platform, not in a production yet but you have to expect you are actually aiming as high as 250k EUR for complete package without payload. If your target is to use higher grade components, you are looking at the right direction. If you are looking for a hobby grade components (to save budget), I'm not sure you will make success with such requirements in the end.

          Good luck !

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: The dev team is having fun with virtual @DIYRobocars track generation with Unity on the @donkey_car discord: https://t.co/l0Jd9…
20 hours ago
DIY Drones via Twitter
Review of the new Nivida Jetson NX for robocars https://t.co/bWjd3sH2o4
Tuesday
DIY Robocars via Twitter
RT @chr1sa: My review of the new @NVIDIAEmbedded Jetson Xavier NX in robotics and @DIYRobocars applications https://t.co/O7TfJZhiF9 https:/…
Monday
DIY Drones via Twitter
RT @chr1sa: Somehow I missed this, but last week @Nvidia released a new version of its Isaac robot development framework. Lots of new Lidar…
Monday
DIY Robocars via Twitter
RT @Smartphone89: DonkeyCar Racing League Korea #donkeycar @diyrobocars https://t.co/mDlHDR1d98
Friday
Jørn Ramnæs liked VIDEO LINK's profile
May 28
Mark Harrison left a comment on Moderators
"Wow, Ning2 looks really great on mobile. I had sort of drifted away as my browse-time went more on my phone, so this is great."
May 28
Hank Deucker left a comment on PIXHAWK
"I am sure most will say not again, Pixhawk telemetry. I do need help and all can be reassured that I have spent many hours scouring the net for useful information. I am not new at quadcopter flying, I started in 2012 and have progressed through many…"
May 28
DIY Robocars via Twitter
https://t.co/rLmFr8M2UK
May 28
Hank Deucker left a comment on PIXHAWK
"Tomorrow, I am thinking about the wording at the moment."
May 28
DIY Drones via Twitter
Welcome to the new DIY Drones design!. You may have noticed that DIY Drones looks a little different today. That's… https://t.co/cg2EmeDGMQ
May 27
DIY Drones via Twitter
New! Online Training on Drones for Disaster Response https://t.co/brqRuujjY2
May 26
DIY Robocars via Twitter
https://t.co/8EMCvYW6oz
May 25
DIY Robocars via Twitter
RT @OttawaAVGroup: We are going to try something new this week. We will be having a drop-in style meeting Wednesday @ 7-9pm EST. Pop in and…
May 25
DIY Robocars via Twitter
RT @tawnkramer: Thanks Everyone for another fun virtual race! Amazing Ai racers competing head-to-head, Virtual Makers Fair event. Catch us…
May 23
DIY Robocars via Twitter
RT @make: Find out the latest from @diyrobocars at 10am PT from @chr1sa of @3DRobotics on Virtually Make Faire! #makerfaire #maketogether #…
May 23
More…