Replies to This Discussion

Permalink Reply by Zeng on November 16, 2016 at 12:50am

we have 400-1400GHz TX ,right now it transfer over 10km,wanna develop over 20KM this TX

• ▶ Reply

Permalink Reply by David Posea on December 25, 2016 at 11:00pm

for video or radio control/tele,etry ?

• ▶ Reply

Permalink Reply by Zeng on December 25, 2016 at 11:13pm

COFMD transmitter & receiver....we are testing but not meet expectations,also the metal box is too heavy ,as high power output need the heat dissipation issue. 

Nop, only focus on the (PA)power amplifier in the transmitter to solve this,improve the power output.

 

• ▶ Reply

Permalink Reply by Zeng on December 25, 2016 at 11:13pm

signal booster  is for receiver that is available.

• ▶ Reply

Permalink Reply by Zeng on December 25, 2016 at 11:14pm

For video transmission system.

David Posea said:

for video or radio control/tele,etry ?

• ▶ Reply

Permalink Reply by David Posea on December 26, 2016 at 9:57am

All three, and if you can use two rpi 0s in thr plane you can señd commands from mission planner etc.

• ▶ Reply

Permalink Reply by David Posea on December 26, 2016 at 9:59am

This week im trying to use two channels to get full 1080p

• ▶ Reply

▶ Reply to Discussion