Dear All,

we are working on a serious project and aim to have triple redundancy in the control; one of the ways of doing this is purchasing a high end system. Our imagination is however whether it would be possible to use eg 4 pixhawks that can be switched on based on the comparative output of their signals: this comparator would seek to compare the signals and when one is totally out of the 3 others, we could switch to one of the 3 others etc.. We have a quad coax copter that can lift 100 kg, so want to be sure:the copter has been tested with a single pixhawk. Does someone have an idea if this can be done, or has been done before and if so what is the experience? Here's some info of the project 


Best regards Winfried +31 653172983 

Views: 2670

Reply to This

Replies to This Discussion


Were you able to accomplish this?

Reply to Discussion



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service