I’m getting an error that the radius of the mission is above the acceptable limit. Never seen this before. I did run a firmware update on my dji inspire 1 pro. any ideas. Im in the field and cannot fly
You will need latest DJI GO 4 app.
1. Unload all application like DJI GO, UgCS, Litchy
2. Start DJI GO 4 (latest version)
3. It should ask you to login using your DJI account
4. After succesfull login to DJI ensure that your drone is recognized by DJI GO 4
5. Say big "thanks" to DJI :)
6. After that you can use another apps
This also happened to me and i lost a day of work.
it would be great if UgCS could send out an email or something if they know DJI have changed something like this.
I had a similar error with a DJI Phantom 4 Pro yesterday with an updated DJI Go 4 app.
In UgCS app on Android table, we would take off, try to fly above 30 m (photogrammetry mission was > 30 m) and it would not go above 30 m. We tried to start the mission and the error gave "The radius of mission is over the acceptance limit". Notes:
I did an uninstall and reinstall of the DJI Go and UgCS apps yesterday- hopefully no update today ha. I just got an email from UgCS just now to test with a UgCS beta version (2.6) update and will try to test tomorrow. Fingers crossed.
I'm very sorry for that. We saw mail from DJI about that and decided that one more mail isn't necessary. It seems that we were wrong.
Yes, another possible solution is to use UgCS for DJI app 2.6 (beta version). It can be downloaded here - https://www.ugcs.com/en/page/version-2-6-beta.
It should work good. Also this version has long awaited camera focus control...
yes, the 2.6 beta app for the tablet worked.
Hi, UgCS for DJI 2.6 has been released.
Thanks, note, we were running into some errors in beta version (bad data uplink). We cleared data and cache, and haven't gotten the tablet app to function since (even with the newer version). Error: "Permission Check Failure- For first time registration, app should be connected to the Internet"- even when connected to internet.
Please send this problem description to email@example.com together with log files from your Android device, they located here:
Device storage > Android > data > com.ugcs.android.vsm.dji > files > log_cat
Note, just tested again back in lab, and the tablet app "Permission" issue went away.
I suspect this was due to flying with DJI Go 4 app (for videography flight re-initializes permission?). If ever clearing data & cache on UgCS, i would recommend doing a quick flight with DJI Go 4 then try relaunching UgCS, but this has yet to be tested thoroughly.