Mission Planner question

Hi I am trying to setup Mission Planner 2.0.14 on a Mac. I have been able to install the firmware on my rig but when trying to follow the instructions found here http://copter.ardupilot.com/wiki/initial-setup/configuring-hardware/ and my screens are different. This is a screen shot of the firmware install. http://screencast.com/t/9zjSCX6sU but after I click OK the screen goes back to white as per this screen shot http://screencast.com/t/La4ckyfVI. I am trying to do first time configuration and calibration of the APM. What am I missing. Thanks!

d

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • APM Planner 2.0 works on Mac and windows. Most of the screenshots on the web were taken from Misson PLannet 1.x. 

    Mission planner is more mature than APM Panner 2.0 but only works on PC. The fundamentals between the 2 are the same but APM PLanner 2.0 looks a bit different. 

This reply was deleted.

Activity