i am a rookie flyer and have absolutely no clue regarding how to program my radio tx to fly the apm 2.5 powered quad rotor. my configuration is 4 1200kv motors,30 amp esc, apm 2.5 flight control board. turnigy 9x tx/rx on a hiller x525 quad frame. 

Views: 284

Replies to This Discussion

Hi Amartya,

First off all I need to know if you have programmed the TGY 9x with the open9x or the ER9x firmware..

if not then this is a link which will solve your problem..


If you have then you will have to do some reading here to help you out 




Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service