New NVIDIA Jetson TX1 Carrier board - PIXEVIA

Hi, we have a new NVIDIA Jetson TX1 carrier board dedicated for drones. It started as a part of tactical UAV project for Lithuanian Ministry of Defence, and now we are offering it to all drone manufacturers and users.

Our PIXEVIA CORE X1 module was created and dedicated for UAVs from day one. It features onboard 3D accelerometer, 3D gyro, 3D compass, barometer together with SD-card, 2x USB3, 2x USB2, 3x UART, HDMI, 8x GPIO, miniPCIe, CSI, I2C, CAN BUS, PWM.
All connectors are ruggedized, temperature range: -20 / +85 ‘C.


It also perfectly works with our AI image processing framework. For more information please visit our website - http://www.pixevia.com/p-core?i=s60.

Pixevia-CORE-X1.png

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • A price tag would be appreciated

  • Paulius, I don't know if I 'm the only one (I doubt it) but when I see a "contact us for quote", my fingers spasm and close the browser while I start developing an aversion for the company involved.

  • Sounds nice, but without pricing we can not compare it to the Connect Tech and Auvidea carrier boards (which have prices on the net). The same problem we face with AverMedia and Aetina (ACE-N510) products.  

  • Price ?

  • I doubt I could afford what you are going to ask for it,  but it looks really nice.  I use a Pixhawk 2.1 with Edison.  This would be the next logical jump up. 

    It would be perfect for me if it integrated an LTE modem,  and GPS.   Are these manufactured in Lithuania?  Could probably make a ton of money and get tons of contributions to improve your software if you came out with your own "Pixhawk" and made it play nice with Ardupilot.

    Heck or even make it compatible with the new Pixhawk cube.

This reply was deleted.

Activity

DIY Robocars via Twitter
https://t.co/goTOm2tmK7
13 hours ago
DIY Robocars via Twitter
https://t.co/gAmme4l1pn
13 hours ago
DIY Robocars via Twitter
https://t.co/sI9IXSyTA6
13 hours ago
DIY Robocars via Twitter
RT @SmallpixelCar: Test my algorithm on real car https://t.co/idWRxcrmuK
Tuesday
DIY Robocars via Twitter
RT @breadcentric: Evo is coming to town. If you have an #AWS #DeepRacer, you can purchase an extension pack! https://t.co/w60JwI98Hp #Machi…
Monday
DIY Robocars via Twitter
https://t.co/bzpbxytpsv
Monday
DIY Drones via Twitter
RT @chr1sa: My talk on PX4 and FAA certification is coming up at 1:45 PST today on the PX4 Dev Summit livestream. Includes some cool new st…
Jul 7
DIY Drones via Twitter
RT @seesharp: I'm tuned into the PX4 / Dronecode free live conference. Great stuff. Microsoft AirSim talk in 10 minutes. https://t.co/0zbZ2…
Jul 6
DIY Robocars via Twitter
RT @masato_ka: 距離センサを3つとESP32を付けたラジコンカーをDonkeyCarライクにNNで自動走行。3層FC極小モデルをTensorFlow Lite for microcontrollerで動かしてる。機体は借り物でRumiCarって言います。Tenso…
Jul 5
DIY Robocars via Twitter
RT @SmallpixelCar: My car was able to go all the way autonomously until the crosswalk. It was only 100 yards from the target. What should b…
Jul 4
Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Smart move. The car used the shadow to guide it through the bridge. This was never in the training samples. But it learn…
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Getting closer to the target. Single camera. Untrained road. https://t.co/Wsr7RwDamj
Jun 29
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: #donkeycar https://t.co/czuLoVRcA4
Jun 29
More…