Buenas tardes muchachos

ya tengo avanzada la configuracion de mi Hexa pero tengo problemas para lograr la telemetriame sale el mensaje de "No Heartbeat Packets Received" ya configure mi 3DR kit 915 a 57Kb y el MP tambien con el puerto pero se acaba el conteo y sale este mensaje

MP ver. 1.2.36

APM ver 2.5

version de SIK- 1.6

Por favor necesito de su ayuda

saludos

Views: 677

Reply to This

Replies to This Discussion

Better use english language :-)
Try to swap Rx and Tx line on "air" side. If you are using module without USB on "ground" side, try to swap Rx and Tx on this side also. Try all combinations.

Es mejor utilizar el idioma Inglés :-)

Trate de cambiar la línea Rx y Tx, el "aire" lado. Si está utilizando el módulo sin USB en "terreno" lado, intentar cambiar Rx y Tx de este lado también. Pruebe todas las combinaciones.

Hi Marcin

I upgrade both radio to Sik v.1.6 but both have solid led green an the 3DR Tools is OK, but dont connect in MP error "no heartbeat packets received"

Help me :(

Connect both radios to PC:

- ground module directly to USB,

- air module via USB-UART, just like for firmware upgrade process,

Open any terminal program (or just 3DR Radio Config Tool and go to "Terminal" option) twice, set proper Com port and baud rate and start typing in first terminal window. You should see same text in second terminal. Then try typing in second terminal and see result in first.

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service