Octo-X, bicycle wheel design #2.

Q: will it fly?  fly well?
3690970923?profile=original

I'm prototyping my latest design - got my motor mounts put together.  Other than the plate in the middle, this is the only thing that isn't out-of-the-box... but could be made very simply if they prove to be robust enough:

3690970867?profile=original

Am now toying with a 4+4 octo design - with 4 motors pulling, and 4 motors pushing such that the props can overlap about 2cm at the tip, but because of the over/under design never actually come close to interfering.

3690970950?profile=original

This is a mountain bike wheel - for a 26" wheel - the OD measures 22.5" with props @ 24.5" diam.  

(am going to try using 4 pulling 880kv motors with 11x4.7 blades, and 4x850kv with 10x4.7 blades)

The next step up using the wheel design, with similar mounts, would be a road-bike wheel which measures 25"diam. and would have props @ 27"diam.

Here is the 2cm overlap from above:

3690970965?profile=original

I'm interested to know what behavior I might get with this combo - has anyone tried it?  Am I off my rocker?  Working on fixing up the center stack now.  I've flown a quad with this setup before... it worked pretty well when the ESCs weren't overheating for the hot day + heavy camera load.

Feedback very appreciated!

~jake

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  •  few of the designs I am playing with now.... Jay, whats up with you project?

    Any new development on the rimcopter ?

    P1010830.JPG

    Raven Y6 side.JPG

    x Quad Wheel.jpg

    https://storage.ning.com/topology/rest/1.0/file/get/3702748583?profile=original
    • I've been running the thought of the Y in my head and saw yours.what size rim did you use?where did you get it?did you cut it in 1/3?or what are the rim spans cut to cut?

  • here is my latest effort ; )

    x Quad Wheel.jpg

    x quad wheel b.jpg

    Motor mount.JPG

  • Mine floats :)

    the pool noodles weigh not so much...

    octo wheel.jpg

  • here she is .... tested in 30Km gusts w/ gopro hero and FPV kit.. still flies nice and smooth :)

    octo wheel.jpg

  • Ok... I flew the octo wheel today... Set up using octo +

    4s 5000 / 22/15 900Kv / 20A ESC / 9/6 Props

    The craft flew surprisingly well... overall the most stable multi I have flown to date.

    Mavic 319 DISC rim 700c weight listed as 595 grams...

    AUW for the octo wheel, including 4s 5000mAh 70c = 2.5 kg

    Waiting for the gimble... and building landing gear... pics and video coming soon.

  • It's not exactly Octo... it might be at some point in the not distant future - but for now, Quad will have to do!

    With the new uBlox GPS receiver, I am getting some incredible loiter accuracy... so much so that I was comfy pulling the iPhone out of my pocket and shooting a video with the transmitter largely unattended!

    My original concerns that there might be too much resonant vibration seems to be unfounded - I'm happy to report!  And 4 spokes seem to be perfectly sufficient to carry the central load:

    3692803926?profile=original

  • humm... i thought i was the only one crazy enough to try this.... I just started to put something together last night, then found this thread.

    I am using a 700c Road rim .... and I have the center stack laced into the wheel with stainless spokes.

    Looks kinda cool actually, i'll snap a photo a bit later. I plan on using the spoke to lash some hardware onto.

    I plan on setting it up as an octo, using 22/15 900Kv motors on 20A and 9/5.

    APM 2.5.2 is running the show.

    The idea is to boom a DSLR on gimble... More on that later.... did You ever get this thing to fly?

  • I did something similar.  Pics and videos below:

    Flat octo, wheel design.

    Rick

  • awesome idea. does it fly yet? fly well?

    :D

This reply was deleted.

Activity

DIY Robocars via Twitter
yesterday
DIY Robocars via Twitter
RT @NVIDIADRIVE: Season Beta has arrived! Check out the first race of the @roborace season, livestreaming from Anglesey Circuit Sept. 24-26…
Tuesday
DIY Robocars via Twitter
RT @IndyAChallenge: Here is the ROS-based small-scale vehicle platform showing the ROS Visualization (Rviz) screen with multiple ROS nodes…
Tuesday
DIY Robocars via Twitter
RT @IndyAChallenge: Here is Black & Gold Autonomous Racing's simulated racecar running a lap @IMS and showing the team's code overtaking ot…
Tuesday
DIY Robocars via Twitter
Tuesday
DIY Robocars via Twitter
RT @donkey_car: New Maintainers! Donkey Car 4.0 and more! Here is our September Newsletter! https://donkeycar.substack.com/p/september-donkey-newsletter?r=2ji2t&utm_campaign=post&utm_medium=web&utm_source=copy
Tuesday
DIY Robocars via Twitter
RT @chr1sa: Kinda cool that we just hit 2,500 members of our Bay Area self-driving car racing league. More than 10k globally. Fast, cheap…
Tuesday
DIY Robocars via Twitter
RT @chr1sa: Our next @DIYRobocars virtual AI car race is next Saturday. Compete from home using the @donkey_car simulator -- no physical ca…
Sunday
DIY Robocars via Twitter
RT @RoboticMasters: Students from @Sydney_Uni working hard on improvements and changes to @donkey_car simulator. @diyrobocars @adafruit…
Sunday
DIY Robocars via Twitter
Practice virtual race this Saturday; the real thing will be on Oct 3 https://www.meetup.com/DIYRobocars/
Sep 23
DIY Robocars via Twitter
Sep 23
Derrick Davies liked lisa TDrones's profile
Sep 23
DIY Robocars via Twitter
Sep 21
DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Sep 14
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
More…