I want to set up a Turnigy 9x or FlySky TH9x or Devention Devo 7 to operate an octocopter using Pixhawk 2.8.4 flight controller. I am a complete novice on transmitter setups can anyone help or point me to a wiki

Views: 81

Reply to This

Replies to This Discussion

Octocopter or Quadcopter, the radio settings are the same.

Follow the wiki: http://ardupilot.org/copter/docs/common-rc-transmitter-flight-mode-...

All pertinent information is there.

Pixhack 2.8.4 is not a Pixhawk. It is an adaptation of an old product named Pixhawk. There are recent hardware developments  more suitable for a new and evolutive project.

Many thanks Marc

Marc LE BRET said:

Octocopter or Quadcopter, the radio settings are the same.

Follow the wiki: http://ardupilot.org/copter/docs/common-rc-transmitter-flight-mode-...

All pertinent information is there.

Pixhack 2.8.4 is not a Pixhawk. It is an adaptation of an old product named Pixhawk. There are recent hardware developments  more suitable for a new and evolutive project.

So if I have a quadcopter with + configuration instead of x configuration, is the radio setup still the same but the difference is in setting up the FC through Mission Planner?

cheers, Bruce

You get it,

RC transmitter send commands to the flight controllers (Up, Down, Right, Left,...). Flight controller send commands to the motors.

https://www.rcgroups.com/forums/showthread.php?2429327-Basic-Introd...

Enjoy,

Marc

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service