Only getting warnings on MinimOSD

Hi,

I've recently installed a MinimOSD which I've set up and flashed twice, it detects the heartbeats and looks ok for a few seconds then just puts up and overspeed warning.

I seem to be able to cycle through three warnings including overspeed and battery by using left and right aileron, am I doing something wrong.. Why does the main screen dissapear?

Thanks

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • I fixed mine by throwing it in a box and buying an RVOSD5 :)
  • I've got the same issue with upgrade to version 2.0.

    I fixed it when downgraded firmware to v.1.9

  • OK I figured it out really quickly. Its to do with mode switching. not sure why but for me i had something set to CH8 and i must have Ch8 set to mode switch in minim. So change that or your transmitter and you should be set.

    hope this helps.

  • I have this exact same issue. I had it working but then i changed some stuff around and now its broken.

    For me, its works fine until i turn on my transmitter.
    Its hard to fly without a transmitter.

    Did you every find a resolution?

  • Something else that I have noticed, at the same point this happens the voltage reading goes to 8.14v (it's a 3s) and current 14A ???
This reply was deleted.

Activity

DIY Robocars via Twitter
Practice virtual race this Saturday; the real thing will be on Oct 3 https://www.meetup.com/DIYRobocars/
Wednesday
DIY Robocars via Twitter
Wednesday
Derrick Davies liked lisa TDrones's profile
Wednesday
DIY Robocars via Twitter
Sep 21
DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Sep 14
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: How this works: 1)object detection to find cones in single camera image, 30 frames/sec on @NVIDIAEmbedded Xavier. 2)comp…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: Use two color cones to guide the robocar. No map needed, on onsite training needed. Just place the cones and it will fol…
Sep 7
DIY Robocars via Twitter
Sep 7
DIY Robocars via Twitter
RT @roboton_io: Great to see http://roboton.io running at 60fps on the cheapest #chromebook we could find! #edtech #robotics #educat…
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Crazy in-depth article about using the OpenMV Cam for Astrophotography: https://github.com/frank26080115/OpemMV-Astrophotography-Gear https://t.co/BPoK9QDEwS
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Hi folks, it's finally here! Our first draft of our Arduino Interface Library is out! It works over SoftwareSerial, Hardware…
Sep 3
DIY Robocars via Twitter
RT @chr1sa: Please let them have an open API. This would be perfect for @DIYRobocars races https://twitter.com/NintendoAmerica/status/1301513099707658246
Sep 3
DIY Robocars via Twitter
RT @SmallpixelCar: Lanenet pretty much used all my GPU power on @NVIDIAEmbedded Xavier since I optimized with tensorRT. I need to run anoth…
Sep 3
DIY Robocars via Twitter
RT @LyftLevel5: Our @kaggle competition on Motion Prediction for Autonomous Vehicles is now live! Experiment with the largest-ever self-dri…
Aug 24
More…