OSD stops collecting data

I have a Minum OSD getting data from a Pixhawk. It always works well until I throttle up to take off and then the data freezes. I can land and push the reset on the OSD and it starts updating again until I throttle up again. I just connected the grounds on all of the voltage regulators together, but there was no improvement. I did have the rf link on telem 1 and the OSD on telem 2 and when it locked up I moved both of them to telem 1. Of course it works no better. The rf link always works well.I would greatly appreciate help with this.Thanks,David

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Check this http://fpvlab.com/forums/showthread.php?29508-MinimOSDS-at-5V-on-bo...

    You should connect both GND and VCC on minimOSD, (small solder blobs) and than don't run 12V on video side. (just don't connect power pins on minimosd on video side)

    To power camera and vTX you should use LC filter to eliminate DC nose. And all your problems should go away.

    PowerTieMinimOSD.jpg

    • Thank you for the response. I already have the lands tied and no power on the TX side. I ordered the LC filter and look forward to trying it out. I bet that is it! It makes sense that it is electrical noise from the ESC's.
This reply was deleted.

Activity

DIY Robocars via Twitter
RT @Jetsonhacks: And I helped with the course! JetBot, JetBot, happy little JetBot! JetBot ... GO! Meet the Jetson Specialists Inspiring a…
20 hours ago
DIY Robocars via Twitter
RT @a1k0n: Designed RPi + camera mounts + new bumper for the new car. Fits great on the car first try, except my longest camera cable doesn…
20 hours ago
gotham liked gotham's profile
yesterday
DIY Robocars via Twitter
RT @RoboticMasters: Monaco GP Circuit in the Donkey Sim (coming soon). Including buildings, tunnel and all! https://github.com/robotics-masters/sim-donkeycar-f1/tree/f1-tracks @diyr…
Wednesday
DIY Robocars via Twitter
RT @breadcentric: Here are the details of #AWSDeepRacer finals: https://blog.deepracing.io/2020/12/01/aws-deepracer-league-finals-2020-round-1-schedule/ #awsreinvent2020 #AWSreInvent https://t.co/ovqsjp8V…
Wednesday
DIY Robocars via Twitter
RT @breadcentric: #AWSDeepRacer League #awsreinvent2020 Open race is on Dec 1st - Dec 31st in three categories, 15 DeepRacer Evo (with LIDA…
Wednesday
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars It's just something that's easy to track with chroma keying. I ended up using different colors on th…
Monday
DIY Robocars via Twitter
Monday
DIY Robocars via Twitter
RT @TinkerGen_: "The Tinkergen MARK ($199) is my new favorite starter robocar. It’s got everything — computer vision, deep learning, sensor…
Nov 23
DIY Robocars via Twitter
Nov 23
DIY Robocars via Twitter
RT @roboton_io: Join our FREE Sumo Competition 🤖🏆 👉 https://roboton.io/ranking/vsc2020 #sumo #robot #edtech #competition #games4ed https://t.co/WOx…
Nov 16
DIY Drones via Twitter
First impressions of Tinkergen MARK robocar https://ift.tt/36IeZHc
Nov 16
DIY Robocars via Twitter
Our review of the @TinkerGen_ MARK robocar, which is the best on the market right now https://diyrobocars.com/2020/11/15/first-impressions-of-tinkergen-mark-robocar/ https://t.co/ENIlU5SfZ2
Nov 15
DIY Robocars via Twitter
RT @Ingmar_Stapel: I have now explained the OpenBot project in great detail on my blog with 12 articles step by step. I hope you enjoy read…
Nov 15
DIY Robocars via Twitter
RT @DAVGtech: This is a must attend. Click the link, follow link to read the story, sign up. #chaos2020 #digitalconnection #digitalworld ht…
Nov 15
DIY Robocars via Twitter
RT @a1k0n: Got a new chassis for outdoor races (hobbyking Quantum Vandal) but I totally didn't expect that it might cause problems for my g…
Nov 11
More…