pid value

below is a link for my quadcopter simulation.

http://youtu.be/8xYpy0YkA-c

my pid value for the roll and pitch is p=0.7,i=0,d=0.1 while for yaw is p=0.2,i=0,d=0.

can anyone advice me on why my quadcopter can't stabilise and keep spinning in a cw direction and tend to drift away from the starting point.

is it because my pid value is wrong?

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • MR60
    Is your quad symetrical on all axis ? If yes parameters for roll and pitch should remain identical.

    Second it is a good rule to have I=P. I see your I is zero which means basically that you do not use the integral part of the pid loop. I is used to compensate for permanent external forces on the quad such as wind for example.

    What is the weight of your quad and what props do you use at which KV ?
  • MR60

    If you are a mathematician, the P is Proportion, D is Differencial, and I is Integral ... and these will all have instant meaning to you.  But if you are not:

    Think of P as being the Power of the response.

    Think of D as being the raDar that watches how close the correction is getting to target and making an appropriate response.

    Think of I as being Intelligence remembering the long term

    So the existing yaw settings have no raDar and no Intellegence, just a little power and maybe not enough.

    If changing the PIDs for yaw do not correct well enough then you may:

    o have a bent motor mast

    o have a loose motor mast bolt

    o have a loose or tilted motor mount

    o incorrect rotor spin (you can tell this by applying Yaw and watching which motor spin up and down)

This reply was deleted.

Activity

gotham liked gotham's profile
9 hours ago
DIY Robocars via Twitter
RT @RoboticMasters: Monaco GP Circuit in the Donkey Sim (coming soon). Including buildings, tunnel and all! https://github.com/robotics-masters/sim-donkeycar-f1/tree/f1-tracks @diyr…
yesterday
DIY Robocars via Twitter
RT @breadcentric: Here are the details of #AWSDeepRacer finals: https://blog.deepracing.io/2020/12/01/aws-deepracer-league-finals-2020-round-1-schedule/ #awsreinvent2020 #AWSreInvent https://t.co/ovqsjp8V…
yesterday
DIY Robocars via Twitter
RT @breadcentric: #AWSDeepRacer League #awsreinvent2020 Open race is on Dec 1st - Dec 31st in three categories, 15 DeepRacer Evo (with LIDA…
yesterday
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars It's just something that's easy to track with chroma keying. I ended up using different colors on th…
Monday
DIY Robocars via Twitter
Monday
DIY Robocars via Twitter
RT @TinkerGen_: "The Tinkergen MARK ($199) is my new favorite starter robocar. It’s got everything — computer vision, deep learning, sensor…
Nov 23
DIY Robocars via Twitter
Nov 23
DIY Robocars via Twitter
RT @roboton_io: Join our FREE Sumo Competition 🤖🏆 👉 https://roboton.io/ranking/vsc2020 #sumo #robot #edtech #competition #games4ed https://t.co/WOx…
Nov 16
DIY Drones via Twitter
First impressions of Tinkergen MARK robocar https://ift.tt/36IeZHc
Nov 16
DIY Robocars via Twitter
Our review of the @TinkerGen_ MARK robocar, which is the best on the market right now https://diyrobocars.com/2020/11/15/first-impressions-of-tinkergen-mark-robocar/ https://t.co/ENIlU5SfZ2
Nov 15
DIY Robocars via Twitter
RT @Ingmar_Stapel: I have now explained the OpenBot project in great detail on my blog with 12 articles step by step. I hope you enjoy read…
Nov 15
DIY Robocars via Twitter
RT @DAVGtech: This is a must attend. Click the link, follow link to read the story, sign up. #chaos2020 #digitalconnection #digitalworld ht…
Nov 15
DIY Robocars via Twitter
RT @a1k0n: Got a new chassis for outdoor races (hobbyking Quantum Vandal) but I totally didn't expect that it might cause problems for my g…
Nov 11
DIY Drones via Twitter
First impressions of the Intel OpenBot https://ift.tt/36qkVV4
Nov 10
DIY Robocars via Twitter
Nov 9
More…