Is there anyone out there that is using the Pixhawk on a helicopter that has a CCMP helicopter? I'm having a hard time figuring out how to get my servos to work correctly with the pixhawk. i know there isn't any power outputs on the Pixhawk so i know that a ESC has to be used but I'm not sure how to wire all the servos and ESCs to the pixhawk and make them link and work. I've looked up on several ways to do this but nothing. can anyone help?? thanks!

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –


  • Hello Cole,

    On the Pixhawk you have to push the arm button to activate the outputs. After you pushed the button the servos get the position signal and they will move.

    Make sure your ESC has an BEC include.


This reply was deleted.


xemone liked Max Gilson's profile
Aug 31
nick rymer left a comment on ArduCopter User Group
"I recently switched laptops and now have Windows 10. I installed Mission Planner on my laptop and plugged a mRo SiK Telemetry Radio into the USB port. The radio is not recognized on the com ports but is instead on the "Other Devices" tab in Device…"
Aug 20