Hello I have a Pixhawk and I am trying desperatly to connect my neo-6m (no compass) to the board. I get power to the Gps and APM, Mission Planner, and Droidplanner all recognize it. My problem is that no matter how long I wait or where I try to set up the Gps it wont fix. I get a "no fix" every single time I try to use the Gps. I am running the latest software on the Pixhawk and I've waited at least an hour outside on a clear day to fix the Gps. What should i do?!?!?!?! Thank You!

Views: 5288

Reply to This

Replies to This Discussion

Did you check to see if the rx and tx lines are reversed.

Yes and the green "fix" led on the gps is flashing.

Did you check this page out: http://copter.ardupilot.com/wiki/common-ublox-gps/

If you can hook it to your computer you can see if the module is working at least.

 

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service