Pixhawk reboot in Auto

Hi everyone!!

Today Pixhawk (latest Arduplane) rebooted twice. Once I heard it plaing music tones while it was in the air in Stab mode(lost connection with GCP had to land). And then second time while autotake off in Auto mode. https://youtu.be/vuOHnHxoKYA

What could that be? Did I do somthing wrong with settings? Wires and everything been done proffesionally, no shortcuts and loose wires.

Please help!

18.BIN

19.BIN

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • This reply was deleted.
    • Admin

      @Justin,

      If you are powering your gimbal setup off of the Pixhawk servo output bus power rails using a BEC, you definitely need the zener to prevent power spikes from either the servos or brushless motors on your gimbals from causing the Pixhawk to reset.

      Regards,

      TCIII AVD

    • Moderator

      Check your power setup. 

  • Admin

    @Innokentiy,

    Have you installed the 5.6vdc zener diode on the Pixhawk servo output power bus rail per ArduPlane Wiki instructions Link?

    Servo (digital are worse than analog) induced voltage spikes on the servo output power bus, which the Pixhawk uses as a secondary power input, can cause the Pixhawk to reset.

    Regards,

    TCIII AVD 

    • My Pixhawk is powered through Power Port by 5V bec with Attopilot current sensor. And I just found out that servos were povered by 5.8V from Esc BEC via servo rail(Main OUT) and theres no zener diode, and I have digital servos... I didnt know this coz someone else was assembling plane for me. So today we unpluged all red wires(+5.8V) out of servo rail and connected Esc BEC red wire with servos red wires without connecting them to pixhawk. So no Pixhawk doest not have any power at servo rail(main out rail) and its only power by stable 5V bec through main power port.

      Wont be able test fly for next week but I think should be ok now. Thank you so much for help!!!!

  • Oh and 15 and 16.log is the first flight-reboot.

    15.log

    16.log

    https://storage.ning.com/topology/rest/1.0/file/get/3701960174?profile=original
This reply was deleted.

Activity

DIY Robocars via Twitter
Practice virtual race this Saturday; the real thing will be on Oct 3 https://www.meetup.com/DIYRobocars/
yesterday
DIY Robocars via Twitter
yesterday
Derrick Davies liked lisa TDrones's profile
yesterday
DIY Robocars via Twitter
Monday
DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Sep 14
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: How this works: 1)object detection to find cones in single camera image, 30 frames/sec on @NVIDIAEmbedded Xavier. 2)comp…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: Use two color cones to guide the robocar. No map needed, on onsite training needed. Just place the cones and it will fol…
Sep 7
DIY Robocars via Twitter
Sep 7
DIY Robocars via Twitter
RT @roboton_io: Great to see http://roboton.io running at 60fps on the cheapest #chromebook we could find! #edtech #robotics #educat…
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Crazy in-depth article about using the OpenMV Cam for Astrophotography: https://github.com/frank26080115/OpemMV-Astrophotography-Gear https://t.co/BPoK9QDEwS
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Hi folks, it's finally here! Our first draft of our Arduino Interface Library is out! It works over SoftwareSerial, Hardware…
Sep 3
DIY Robocars via Twitter
RT @chr1sa: Please let them have an open API. This would be perfect for @DIYRobocars races https://twitter.com/NintendoAmerica/status/1301513099707658246
Sep 3
DIY Robocars via Twitter
RT @SmallpixelCar: Lanenet pretty much used all my GPU power on @NVIDIAEmbedded Xavier since I optimized with tensorRT. I need to run anoth…
Sep 3
DIY Robocars via Twitter
RT @LyftLevel5: Our @kaggle competition on Motion Prediction for Autonomous Vehicles is now live! Experiment with the largest-ever self-dri…
Aug 24
More…