Can someone tell me the differences between a Pixhawk and the Pixhawk 2 that 3DR is marketing as being supplied with the Solo?

 

I've tried searching, but only found vague references to Pixhawk 2.

Even the 3DR web site is very light with info about Pixhawk 2.

Perhaps the info is being kept quiet until the final release? If so, that's ok, just let us know.


Thanks!

Rich

Views: 48485

Reply to This

Replies to This Discussion

Guauu!!! that's the gps on one side?

This GPS is a UBloxM8N with a 60mm ground plane.

philip

we are so many to wait the next official pix 2 from dev team!!i hope we could get one during this summers...do you have an idea about the price range

Paul M please stand at the end of the waiting line ;-)

Is this final shape of Pixhawk2?

There will be two options, mini, and full

That picture is the "full"
Still negotiating with parts suppliers... Once we have finalised that, we can start talking pricing.

thanks a lot

i hope it will be below 170usd!!

We are going to have  the chance to buy pheripeals as spare parts and use what we have or change for newer ones when this come to the market yo give a try? that's what dyiers like to do I think . ;)

What's the little black box on the top? a wifi module?

What's the little black box on the top? a wifi module?

No, Cala. This cube is the Pixhawk 2, plugged into the daughter board.

This is the Pixhawk 2. It is a modular system.
For OEMs, they can just place the cube directly, for Enthusiastic DIY, you can build carrier boards that suit your needs.

For others, you can buy a carrier board that breaks out the connectors. It's flexible.

Inside the cube is a Tripple IMU autopilot, with heating and vibration isolation.

To put that in perspective...
It has 9 gyros (3 X 3 axis) 9 accelerometers, 6 magnetometers, two barometers.
That's 26 mems sensors!


All of that is in the cube, the carrier is mearly a glorified wiring loom, of which anyone is free to make their own!
Attachments:

Thank's Philip, looks nice.

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service