Powering up ardupilot for the first time.

Hi AllI have one of the old ardupilots which I got before the 26th of Jan, not sure if this will effect anything. But on power up of the board the following happens: All the lights of the board comes on then the power light stays on and all the other lights start flashing in a sequence, not sure if this is a good or a badthing, can anybody help? (sorry very new to the game) Regards

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • You're right Chris - it works ! Seems that my USB cable has a fault since the FTDI board would only be detected < half the time on connection; a spare cable cured the problem. Apologies are probably due to Sparkfun.
    Thanks for your comments.
  • thanks for all the advice, i need to get hold of someone in SA with a programmer to flash the Attiny chip, maybe someone knows someone who can help. Thanks
  • Hi all,
    My guess, Andre, is - don't worry ! I have recently received a board from the same batch and had the same result. After much head scratching I reasoned that this is most likely an in-built test sequence to show that it all works. If the powers that be know better please let us (both) know.
    My problem is I discovered that the Sparkfun FTDI Basic board doesn't seem to work with the Ardupilot - yes I read the note about using the Adafruit cable but hey come on at $14 v $20 I had to try the Spkfn one. I am now looking for bits to put an ICSP plug together.
    I also got an error message in Arduino:
    error: 'Altitude' was not declared in this scope In function 'void GPS()':
    when testing the latest code.
    Earlier code works fine.
    Is this a real error or have I missed something ?

    Regards
  • Developer
    Yes everything is correct. But remember that the attiny is not working properly and you need to update the firmware. Also the atmega has nothing, you need to upload need code via the ftdi cable. That blinking LEDs are just to verefy the board is working properly.
This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars It's just something that's easy to track with chroma keying. I ended up using different colors on th…
yesterday
DIY Robocars via Twitter
yesterday
DIY Robocars via Twitter
RT @TinkerGen_: "The Tinkergen MARK ($199) is my new favorite starter robocar. It’s got everything — computer vision, deep learning, sensor…
Nov 23
DIY Robocars via Twitter
Nov 23
DIY Robocars via Twitter
RT @roboton_io: Join our FREE Sumo Competition 🤖🏆 👉 https://roboton.io/ranking/vsc2020 #sumo #robot #edtech #competition #games4ed https://t.co/WOx…
Nov 16
DIY Drones via Twitter
First impressions of Tinkergen MARK robocar https://ift.tt/36IeZHc
Nov 16
DIY Robocars via Twitter
Our review of the @TinkerGen_ MARK robocar, which is the best on the market right now https://diyrobocars.com/2020/11/15/first-impressions-of-tinkergen-mark-robocar/ https://t.co/ENIlU5SfZ2
Nov 15
DIY Robocars via Twitter
RT @Ingmar_Stapel: I have now explained the OpenBot project in great detail on my blog with 12 articles step by step. I hope you enjoy read…
Nov 15
DIY Robocars via Twitter
RT @DAVGtech: This is a must attend. Click the link, follow link to read the story, sign up. #chaos2020 #digitalconnection #digitalworld ht…
Nov 15
DIY Robocars via Twitter
RT @a1k0n: Got a new chassis for outdoor races (hobbyking Quantum Vandal) but I totally didn't expect that it might cause problems for my g…
Nov 11
DIY Drones via Twitter
First impressions of the Intel OpenBot https://ift.tt/36qkVV4
Nov 10
DIY Robocars via Twitter
Nov 9
DIY Robocars via Twitter
Excellent use of cardboard instead of 3D printing! https://twitter.com/Ingmar_Stapel/status/1324960595318333441
Nov 7
DIY Robocars via Twitter
RT @chr1sa: We've got a record 50 teams competing in this month's @DIYRobocars @donkey_car virtual AI car race. Starting today at 10:00am…
Nov 7
DIY Robocars via Twitter
Nov 6
DIY Robocars via Twitter
RT @a1k0n: Car's view, using a fisheye camera. The ceiling light tracking algorithm gave me some ideas to improve ConeSLAM, and having grou…
Nov 5
More…