Our High Altitude Balloon (HAB) project aims to return the electronics on board a HAB autonomously. Traditionally, weather and HAB's return electronics safely to the ground via parachute, but this obviously steers waaaayy off from the launch site and takes hours to find. We aim to cut down the risks involved by just bringing everything back via flying wing.

The flight plan is as follows:

1.) Climb to 100,000 feet under balloon
2.) Have balloon explode at highest altitude and have small parachute bring down the plane from 100,000 feet to 30,000 feet. Lack of air pressure makes the void from 100,000 feet to 30,000 feet an uncontrollable abyss for the glider. Small parachute is used to decrease terminal velocity.
3.) Airplane releases itself from flight line and glides towards destination.

My Project Log series aims to provide short sweet and to the point updates to said project. Heres the most recent one:

This week I try to start making progress on the flight controller. Starting off with the original program code written by Kemal, I try to fix things here and there to smooth out the glide.

Next video will explain the program a little bit more, and will be of trying to achieve a successful autonomous straight line flight, and trying to incorporate turns.

Side note, you guys know of any other arduino flight controller projects i could pick up on and learn from? Computer science isnt my strong suit.

Previous uploads:

Project Log 1: Introductions

Project Log 2: Base Flight Test

Project Log 3: Q&A about design choices

I'm trying to do this whole project from the bottom up DIY, so i'll be keeping an updated, weekly project log series going! Let me know what you guys think of the project so far, and drop any feedback if you have them!


You need to be a member of diydrones to add comments!

Join diydrones

Replies are closed for this discussion.

Replies

  • Got it. Just posted there as well, awaiting approval. Out of etiquette, do I erase this post?

  • 3D Robotics

    Just click the "Create a News Report" menu item above

    http://diydrones.com/profiles/blog/new

  • Great advice! Thank you, i'm new here though. How do I post as a news item?

  • 3D Robotics

    Great post. You might consider reposting this as a news item so it goes on the front page. Don't forget to inline the videos as embed codes (video icon in the tool bar), not just links, so they will display in the post.

This reply was deleted.

Activity

DIY Robocars via Twitter
Oct 23
DIY Robocars via Twitter
RT @_JonMyer: 🏎 We need your help in naming my #AWS DeepRacer Underground Track 🏎 @davidfsmith's track is going to be referred to as 𝗔𝗪𝗦 𝗗…
Oct 22
DIY Robocars via Twitter
RT @gclue_akira: 仕事もおわったし、電脳化にとらい #マリオカートハック https://t.co/4IU90hCLgm
Oct 22
DIY Robocars via Twitter
This is the hashtag to follow all the people in Japan who are hacking the new Nintendo Mario Kart with the real AR… https://twitter.com/i/web/status/1319281354664677376
Oct 22
DIY Robocars via Twitter
RT @gclue_akira: @chr1sa @diyrobocars jupyter mario https://t.co/P0oHdjlCRq
Oct 22
DIY Robocars via Twitter
RT @_JonMyer: 🚨Our 1st AWS DeepRacer Community Race is Underway on http://twitch.tv/aws 🚨 Join us to find out which member of your commu…
Oct 20
DIY Robocars via Twitter
Oct 19
DIY Robocars via Twitter
RT @BackyardRobotcs: After an admittedly long wait, the new Tinymovr R3.3 motor controller is now available https://tinymovr.com 🥳
Oct 19
DIY Robocars via Twitter
RT @_JonMyer: 🏎 1 hr left before the #AWS #DeepRacer Community 🏎 Top 5 Race tomorrow LIVE on Twitch 1st Place = $50 Amazon GC or AWS Credit…
Oct 19
DIY Robocars via Twitter
Oct 16
DIY Robocars via Twitter
Oct 15
DIY Robocars via Twitter
Oct 14
DIY Robocars via Twitter
RT @davidfsmith: Race virtually with The AWS DeepRacer Community Race and then join us on the track to see how your times compare on the ph…
Oct 14
DIY Robocars via Twitter
Oct 14
Hiroki Tanaka liked Hiroki Tanaka's profile
Oct 13
DIY Robocars via Twitter
RT @breadcentric: It's now!
Oct 13
More…