Hi,
I am flying with arducopter in my multicopters more than 5 years, and this is the first time I can’t solve the problem by myself.
The problem is: after 8 or 9 minutes flying in pos-hold mode, my quad start to drift in circles. And the circles are bigger and bigger.
After this when I correct using the Stick, and after a few seconds the circles starts again.
But the stranger thing is, in the beginning of the flight pos-hold is “Rock solid”.
The setup is:
Raspberrypi3 + Navio2 board with arducopter 3.5 version.
Baterry = 6500mah
motors - T-motor 2814-10 kv770
Propeller - 12-4x5 Rctimer
ESC - T-motor 40
AUW = 1,8kg , the drone fly with 40% of throttle , these motors are strong
The Multi:
Normal Flight until 9 minuts (but i dont have the problem recorded, because I stoped the recording to “help” the multicopter)
I'm using for fishing , no space for problems
https://www.youtube.com/watch?v=g8oE4nbSx4U&t=22s
Logs:
https://www.dropbox.com/sh/ldzxzn7fznuerxx/AAD67mMgb6nZIvRHCt1Uh7Dya?dl=0
Replies
if everybody doesn’t know and can' t help, I have a real problem.
This is the reason for everybody starts to buy RTF drones, nobody helps.
Sounds like your heading is drifting away.