Hi

trying to write the standard parameters to the Ardupilot Mega 2.5 and Set LED_MODE Failed error message pops up.

Any ideas ?

thanks

Graham

Views: 442

Reply to This

Replies to This Discussion

In the Params list, only sometimes, the LED_MODE is not initialised with a value.

When you change some other value and go to write it the error about LED_MODE pops up.

Just scroll to LED mode and select 'disabled' in the pop up list. Stops the message from happening.

Brill thanks - have made the change and will check it out in the morning.

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service