Sneak Preview of next firmware revision?

I am posting this hoping to give some mouthwatering to all you Multicopter addicts!

The DEV Team is working really hard to get up with a new release of the current Arducopter.

I was brave enough (toghether with other testers like Marco!)  to try an (almost) totally untested clone from Tridge repo this Sunday.

The new DCM updates and the refined attitude control laws seems to be very promising.

The test were done with a Mini Quad (40cm), Medium Quad (55cm.) and a Hexa (65cm.)

Wether conditions were almost perfect (a little wind while flying mini quad), but it was dusk, so lightining conditions were not at the best.

This was the most stable flying copter I ever had. Controls were precise and reactive, but still giving a rock solid stability feeling. No drift even after very hard flying and an almost no hands with only STABILIZE mode.

All this was flown with only STABILIZE, no other mode was tested as it was out of my scope.

Enjoy!

Emile

 

P.S.

Please beware that this is an untested and not supported version. The current version in the repo has changed so I cannot guarantee that the flight will be the same. You need to know GIT, Arduino and other stuff to make it work.

Please be patient and wait for the official release, or if you want to test take your own risks.

 

http://youtu.be/yo7X0_ZZu_4?hd=1

http://youtu.be/ak8yChP-WbI

 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Developer

    Echo was Jason said.... Its incredible. People are always asking if ArduCopter is going to be as stable as some proprietary systems... I say hell yeah! And guess what, the devs do it for free. :-D I'm thrilled to be a part of the ArduCopter community. I call it radically accelerated evolution.

  • Developer

    We were hoping this weekend, but it looks like we need to deal with a few minor issues regarding linear acceleration. 

    I can't stress enough what a monumental effort Tridge and the rest of the team and testers have put into this release. The level of engineering is staggering and the performance improvements are really impressive. It's a whole new copter in my opinion. The DCM fixes really help upstream things like Loiter because the angle hold is much more accurate.

    Exciting times.

  • Any idea on timeframe for when the official release will be?

This reply was deleted.

Activity

DIY Drones via Twitter
RT @chr1sa: My talk on PX4 and FAA certification is coming up at 1:45 PST today on the PX4 Dev Summit livestream. Includes some cool new st…
yesterday
DIY Drones via Twitter
RT @seesharp: I'm tuned into the PX4 / Dronecode free live conference. Great stuff. Microsoft AirSim talk in 10 minutes. https://t.co/0zbZ2…
Monday
DIY Robocars via Twitter
RT @masato_ka: 距離センサを3つとESP32を付けたラジコンカーをDonkeyCarライクにNNで自動走行。3層FC極小モデルをTensorFlow Lite for microcontrollerで動かしてる。機体は借り物でRumiCarって言います。Tenso…
Monday
DIY Robocars via Twitter
RT @SmallpixelCar: My car was able to go all the way autonomously until the crosswalk. It was only 100 yards from the target. What should b…
Saturday
Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Smart move. The car used the shadow to guide it through the bridge. This was never in the training samples. But it learn…
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Getting closer to the target. Single camera. Untrained road. https://t.co/Wsr7RwDamj
Jun 29
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: #donkeycar https://t.co/czuLoVRcA4
Jun 29
DIY Robocars via Twitter
https://t.co/DKQbNTbz0g
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: Donkey car, car car car car car car; Donkey car, car car car car car car; Donkey Car. Anyone like our tiny tiny donkey…
Jun 29
DIY Robocars via Twitter
RT @SmallpixelCar: After improving DBSCAN speed, I can get 11 frame per second on @NVIDIAEmbedded Jerson Xavier MAXN mode and the autonomou…
Jun 26
DIY Robocars via Twitter
RT @Heavy02011: Join us at next Virtual Race League: ⁦@diyrobocars⁩ Race #4 - Parking Lot Nerds, August 1st https://t.co/5KUpu7VGaH
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: #CUDA implementation should be easy, because most of the time is on distance calculations berween two points and if the…
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: This is the view from the car. Even my lanenet inference is fast on @NVIDIAEmbedded Jerson Xavier, DBSCAN clustering tak…
Jun 25
More…