Good day
sorry if this has being discussed here, I am new to the forum and have trolled through the internet looking for a solution. I am looking at using the mix switch on my spectrum dx6i to give me more option in the flight mode section, I see there is a link to it in the arducopter wiki but the link does not exist.

any help on this will be appreciated


Views: 8922

Reply to This

Replies to This Discussion


There was a good post on this but it seems to have disappeared.

You might have found a solution, if not.......Try setting Mix 1 and Mix 2 up like this and you should get 5 modes with the three switches on the left

I always stick some masking tape on the transmitter to remind me of the switch positions...

And make the modes you might need in a hurry easy to remember e.g.. 111 for stabilise and 000 for RTL


Hey Guys,

I know this is a old post, but I'm not quite sure I've been able to setup the 5 modes.

I've programmed my DX6i has Paul described.

But in the flight modes menu of the mission planner software when I switch my Gear, Eleve D/R or Flap Fyro button nothing happens.

Please could you let me know if the process describe by Paul is still up to date ?

Can someone describe with very simple words (I'm new to UAV/RC) how to do it ?



Thanks, it worked for me.

Reply to Discussion


© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service