syncing drone clock to ugcs pc clock for geotagging

Hi

Is it possible to sync the clocks between the drone (in my case, a Mavic 2 Zoom or a Matrice 210 RTK) and the PC with UgCS running? This way I wouldn't need to account for an offset when geotagging an image collection.

Thanks

Views: 74

Replies to This Discussion

Hi Mike,

Best way to sync clocks is to simply make a photo of the exact clock in UgCS ( put the mouse pointer on the clock to open precise clock)

And with the millisecond clock wisible, make a photo with your Mavic 2 or Matrice 210 before performing the flight. Then when you will be using geotaging feature, you will have the time offset always visible in a photo taken before the flight.

Safe flights,

Artūrs

Thanks Artūrs

I have seen that method. I was hoping I could go down a different path and not have to take a pic with the quad of the UgCS screen but maybe sync the clocks through the interface itself, especially since I'm using the UgCS for DJI. I thought maybe there might be a process to do that.

Thanks....

Mike



Artūrs said:

Hi Mike,

Best way to sync clocks is to simply make a photo of the exact clock in UgCS ( put the mouse pointer on the clock to open precise clock)

And with the millisecond clock wisible, make a photo with your Mavic 2 or Matrice 210 before performing the flight. Then when you will be using geotaging feature, you will have the time offset always visible in a photo taken before the flight.

Safe flights,

Artūrs

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service