Tarot X6 - does autotune just suck on large hex's?

Does autotune just generally not work well with large copters that have low KV motors?  (using 6S, 320kv, 17x5.5 CF props).  Honestly I think it flew much better with the default settings than what autotune found for it...and the yaw is super slow and delayed.  Is this just common with large hex's and the pixhawk? Anybody have experience with this frame and care to share the PIDs that work for them so I can at least have a good starting baseline?

Failing that, any suggestions on how to improve it? Especially yaw performance... it suckeths. Tuning large copters is hard because I really don't want to crash this thing... Using copter 3.3 fwiw.

Thanks!

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Thanks Craig!  I set the PIDs back to default and the roll/pitch is quite good with standard parameters.  I messed with the ch6 tied to yaw P and D and it's a bit better now (at least I could see it making a difference), but still nowhere near as responsive as my smaller quads.  When the gain was too low it'd drift a lot, as expected, when it was too high it'd still move relatively slow and delayed but would get kinda unstable when centering the stick.  Maybe that's just how big hex's with large efficient CF props are?  'Pretty happy with it otherwise - rock solid position hold and smooth roll/pitch response.

    • There is a large difference between  say a 550 hex and a 900+ hex. Not that I have flown either plane, but I always refer to smaller multirotors as small and nimble and is like flying a P51 mustang or big and stable is like flying a B52 bomber. VERY different roles and flight characteristics :)

  • I've never had "great" results using Auto-tune to be honest on ANY sized flying lawnmowers. I have found that if built correctly the closer to stock pids I run the better it flies. On my T960 with 320kv motors @ 17.5 CF props it flies PERFECTLY on stock pids so that is where I leave it. Last thing I want to do is tank that sucker :) And since it flies so well @ stock there really isn't any reason to use an auto-tune.

    Instead of auto-tune put everything back to stock, then set up one of your pots to ch6 and then just adjust it until your happy with yaw and then leave that # there.

    http://ardupilot.org/copter/docs/ac_rollpitchtuning.html

    http://ardupilot.org/copter/docs/tuning.html

    InFlight tuning of Roll and Pitch — Copter documentation
    • my 690 hexa´s pid´s goes way off with autotune. Tried the AT many times and allways without succes.

      It flies quite nice with defaults, just little finetuning with "save trim" feature and some other minor changes on parameters.

This reply was deleted.

Activity

DIY Drones via Twitter
Review of the new Nivida Jetson NX for robocars https://t.co/bWjd3sH2o4
yesterday
DIY Robocars via Twitter
RT @chr1sa: My review of the new @NVIDIAEmbedded Jetson Xavier NX in robotics and @DIYRobocars applications https://t.co/O7TfJZhiF9 https:/…
yesterday
DIY Drones via Twitter
RT @chr1sa: Somehow I missed this, but last week @Nvidia released a new version of its Isaac robot development framework. Lots of new Lidar…
Monday
DIY Robocars via Twitter
RT @Smartphone89: DonkeyCar Racing League Korea #donkeycar @diyrobocars https://t.co/mDlHDR1d98
Friday
Jørn Ramnæs liked VIDEO LINK's profile
Friday
Mark Harrison left a comment on Moderators
"Wow, Ning2 looks really great on mobile. I had sort of drifted away as my browse-time went more on my phone, so this is great."
Friday
Hank Deucker left a comment on PIXHAWK
"I am sure most will say not again, Pixhawk telemetry. I do need help and all can be reassured that I have spent many hours scouring the net for useful information. I am not new at quadcopter flying, I started in 2012 and have progressed through many…"
Thursday
DIY Robocars via Twitter
https://t.co/rLmFr8M2UK
Thursday
Hank Deucker left a comment on PIXHAWK
"Tomorrow, I am thinking about the wording at the moment."
May 28
DIY Drones via Twitter
Welcome to the new DIY Drones design!. You may have noticed that DIY Drones looks a little different today. That's… https://t.co/cg2EmeDGMQ
May 27
DIY Drones via Twitter
New! Online Training on Drones for Disaster Response https://t.co/brqRuujjY2
May 26
DIY Robocars via Twitter
https://t.co/8EMCvYW6oz
May 25
DIY Robocars via Twitter
RT @OttawaAVGroup: We are going to try something new this week. We will be having a drop-in style meeting Wednesday @ 7-9pm EST. Pop in and…
May 25
DIY Robocars via Twitter
RT @tawnkramer: Thanks Everyone for another fun virtual race! Amazing Ai racers competing head-to-head, Virtual Makers Fair event. Catch us…
May 23
DIY Robocars via Twitter
RT @make: Find out the latest from @diyrobocars at 10am PT from @chr1sa of @3DRobotics on Virtually Make Faire! #makerfaire #maketogether #…
May 23
DIY Robocars via Twitter
RT @Heavy02011: Join us Saturday online: Virtual Race League: @DIYRobocars Race #2 - Parking Lot Nerds https://t.co/aJUu4sdutx #Meetup via…
May 22
More…