I just installed my APM 2.5 running ArduCopter 2.9.1b on my TBS Discovery type frame (Reptile 500) and during setup I needed to set the frame setup. Since it is not a symmetrical 'X', should I choose the 'V' setup? I cannot seem to find any documentation on this configuration. I found this posting: http://diydrones.com/profiles/blogs/arducopter-tbs-discovery-style but he just changed the source code to compensate for the different arm angles.

Many thanks!

Views: 3187

Reply to This

Replies to This Discussion

I would think V as it looks most like the TBS but I don't know. 

I have heard that the X setup works well on default.

What have you decided to do? Or what did you do?

I have chosen the "V" setup and it is working flawlessly. The picture resembles the frame best, I haven't tried the "X" setup though, but this one is working for me.

Hi,

Is the motor spin directions and prop orientation same on V setup as with X setup? Or is it as in the H setup which is different from X?

X and V is same, H is different those first.

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service