Hi droners,

I'm having a bit of a doubt tilting the lower motors in the Y6 I'm about to maiden.

let's take for instance the two rear motors 8 and 4, 8 turns CCW, and 4 CW, but it's the prop that turns CW, as the motor is rotated 180º as well as the prop, motor 4 will turn CCW like motor 8, right?

So looking at the motors from behind, what is the correct layout for tilting the bottom motors in a Y6, A or B ??

Thanks,

Dani

Views: 1778

Reply to This

Replies to This Discussion

Thanks for these,

What material are the black spacers cut from?

Arthur

THe black parts is PVC stiff, easy to work with and light.

I found out, the Alu I use is 6063-T5. Hope that helps.

:-) yeap, weight matters!

Just noticed the date of this post but popped up as new on my screen??? lol I feel dumb. How did it turn out Danny? All good I hope.:)

Hi Douglas,

the post just relived. I can say that tilting the motors on my Y6 id work, but I broke two props yesterday, and bended all three arms from 30m (second post here: http://diydrones.com/forum/topics/arducopter-2-5-released?commentId... )

I'm already rebuilding it, this time I'l try the motor without the tilting, to see the difference.

thanks for your comments!

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service