I am having problems programming an AMP2.5 using the ArduPilot-Arduino-1.0.3-gcc-4.8.2-windows IDE that I downloaded from the DIY Drone web site:
I have followed the instructions "How to Build ArduPilot with Arduino.pdf" that are posted on the page. I am able to compile the ArduPilot source code from GitHub with no errors but when I try to upload I keep getting the same error:
avrdude: error at C:\Program Files\ArduPilot-Arduino-1.0.3-windows\hardware/tools/avr/etc/avrdude.conf:332: programmer type must be written as "id_type"
I am kind of stumped at this point and I would appreciate any advice.
hi , Randy , the website does not opened when I click the link. Just takes me to a page that says the webpage is not available. could you
hi , Randy , the website does not opened when I click the link. Just takes me to a page that says the webpage is not available. could you reupload or send to my email , my email is email@example.com , thank you .
I download the file and replace it.But something wrong still happen. I can not download the hex file although the ide will display like that.
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x3c001
0x80 != 0xf0
avrdude: verification error; content mismatch
avrdude done. Thank you.
Ok, I think we have a problem with the installation package then.
I'm pretty sure when Tridge and I first tested the -4.8.2 version of the compiler I hit this problem and we resolved it by replacing the conf file.
Download this file: avrdude.conf
Place it in your Arduino-1.0.3/hardware/tools/avr/etc directory
Sorry for the troubles.
Sir, this link doesnt work now...
maybe try this link? avrdude.conf
and sir, I have one more question(desperately)
I want to get AHRS data so I uploaded example sketch to apm
I has uploaded several example sketch to apm successfully
but this time I met compiling error.
I didnt touched any source code in the example sketch but there are compile error like this :
class_ap_inertialsensor_MPU6000 has no member named 'init'
class_ap_inertialsensor_MPU6000 has no member named 'init_accel'
how can I solve this problem..?
Best to join us over on discuss. Also best to give up on the AVR boards and move to something more advanced like a Pixhawk or NAVIO2 or something like that.