Replies

  • Moderator

    I would go with Pixhawk 2.1 with Edison carrier board, Here GPS and the Edison.   If you want a second computer, I would suggest the Odriod XU4 or if you have the budget and room, NVidia TX1.  If you need help building your drone let me know.  

  • Just grab navio2, raspberry pi, raspi cam and 4g! 

    https://www.youtube.com/watch?v=MmcBcOFGWd0

  • John Arne Birkeland 

    How to connect Jetson TX2 to Pixhawk 2.1 and camera

  • Developer

    The mot powerful companion computer hardware solution at the moment is without a doubt the Jetson TX2. But the easiest to develop for is probably the Intel Edison, since you can prototype actual run-time algorithms on a normal desktop computer. Just don't expect it to run the latest in computer learning, or any kind of high speed, high resolution dense (motion data for every pixel) optical flow computations etc.

  • Navio2

  • I suggest dropping in to gitter.im/Ardupilot/VisionProjects and asking the guys in there. For computer vision tasks an odroid xu4 or nvidia tx1/tx2 might be necessary - although it really depends on your setup and specific cv implementation.


  • Eben N. Broadbent said:

    The Edison is your onboard computer for processing. The pixhawk alone is only a flight controller.

    I am sorry for this question.

    What are the examples of processing that will do by Edison?

  • The Edison is your onboard computer for processing. The pixhawk alone is only a flight controller.



  • Eben N. Broadbent said:

    I'm using the Pixhawk 2.1 with Intel Edison. I don't think there are better options regardless of cost. Open-source, Ardupilot or Copter, Intel easy programming approach...

    What is the advantage to outfit Pixhawk with  Intel Edison?

  • I'm using the Pixhawk 2.1 with Intel Edison. I don't think there are better options regardless of cost. Open-source, Ardupilot or Copter, Intel easy programming approach...

This reply was deleted.

Activity

DIY Robocars via Twitter
yesterday
DIY Robocars via Twitter
RT @_JonMyer: 🚨Attention DeepRacer's including #UndergroundDeepRacer🚨 Check our our LIVE stream that including @IAM_dbro Take a few moments…
Aug 5
DIY Drones via Twitter
RT @MarvelmindMaxim: Extreme precision for 60 swarming robots. #marvelmind #autonomousrobotics #robotics #swarmrobotics #rtls #ips #indoor…
Aug 3
DIY Drones via Twitter
RT @MarvelmindMaxim: Precise (±2cm) tracking for racing boats and autonomous boats. Works outdoor and indoor. #autonomous #AutonomousVehic…
Aug 3
DIY Drones via Twitter
RT @MarvelmindMaxim: Helping PixHawk folks to fly autonomous quadcopters using PX4 and ArduPilot. https://marvelmind.com/drones/ Equally suitab…
Aug 3
DIY Robocars via Twitter
RT @chr1sa: The @DIYRobocars @donkey_car virtual AI car race is starting in 15 minutes! Watch it live on Twitch https://www.twitch.tv/mossmann3333 htt…
Aug 1
DIY Robocars via Twitter
RT @chr1sa: Don't miss our monthly @DIYRobocars @donkey_car virtual AI car race tomorrow at 10:00am PT live on Twitch. Head-to-head racing…
Jul 31
DIY Robocars via Twitter
RT @sparkfun: Our completed tutorial on building an @NVIDIA Jetson Nano-powered @Sphero RVR gets your bot up and running via teleoperation…
Jul 30
DIY Robocars via Twitter
RT @SmallpixelCar: Freeway test https://t.co/4V5tV9lhIP
Jul 29
DIY Robocars via Twitter
Very small autonomous cars racing, thanks to an overhead camera: https://control.ee.ethz.ch/research/team-projects/autonomous-rc-car-racing.html
Jul 29
DIY Robocars via Twitter
Jul 29
DIY Robocars via Twitter
Jul 29
DIY Robocars via Twitter
RT @chr1sa: Don't miss our virtual AI car race this Saturday! Real developers + virtual cars =🏎️🏎️🏎️ Head-to-head battles with thrills, sp…
Jul 28
DIY Robocars via Twitter
Jul 27
DIY Robocars via Twitter
RT @usashirou1: Jetson nano by Isaac Kaya #jetson https://t.co/Mu1N0CyQkN
Jul 23
DIY Robocars via Twitter
RT @GPUsolution: JetRacer mady by Iflytek company #JetsonNANO #Nvidia https://t.co/MimTymIwge
Jul 23
More…