Where To Buy Pixhawk

I bought my original at 3dr and now it says out of stock.  Should I buy a fake?  I dont want to. lol!

I want to get the controller and the GPS and all the goodies.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • If anyone wants a Pixracer, I got one from Jordi's shop:

    http://mrobotics.io/

    The shipping for me in California was less that 24 hours, and his customer support has been superb.  I wanted to order something from the US, and it's paid off.  Happy to support local business, and especially one owned by an enthusiast who has already given so much to our community.

  • You can get one on Amazon

  • 100KM

    Excellent!

  • 100KM

    Chris, reveal already! Or did I miss it.. :)

  • I didn't get it to fly.  It won't arm anymore.  I think I am using a power module, can't remember, I haven't used it in a while.

    Steve Kurywchak said:

    Hi Rob,

      How did the 250 fly with a bad IMU using the PixFalcon.?  I have used every board from APM to the PixRacer and cannot get the Hobbyking PixFalcon to lift off without eventually flipping back wards.  Are you using a power module to power the board?  I am using two wires to connect to the PM ,  5V and ground.  We can't power the servo rail, as I am used to doing with all the other boards, also there is no ground connections to the ESCs'.  Any thought you can share? 

                 Thanks,

                 Steve

  • 100KM

    I don't think I can but I'll try!! :) Way to set the stage !

  • 3D Robotics

    If you can wait till Wed, all will be revealed ;-)

  • 100KM

    Very happy about the much improved power module! The rest looks the same as what's on the Holybro PF or am I mistaken? Oh and what's a CAN bus good for on an AP?

This reply was deleted.

Activity

Abdulatif Tlaib liked Ryan's profile
8 hours ago
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Sunday
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available: https://linklab-uva.github.io/icra-autonomous-racing/
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing https://t.co/nMTstsaogM
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26
DIY Robocars via Twitter
RT @a1k0n: Another problem was that I was over-constraining the car's allowed accelerations, so it didn't think it could turn as tight as i…
May 26
DIY Robocars via Twitter
RT @a1k0n: Breaking the map up into two halves worked, but I had to be more careful about separating the inner track from outer. There's se…
May 26
DIY Robocars via Twitter
RT @a1k0n: Here's a datalog for my fastest lap of the day. Lap timer is tiny window lower-left. https://t.co/myrlWWrKUY
May 26
DIY Robocars via Twitter
May 26
DIY Robocars via Twitter
RT @a1k0n: Here was my car's POV. Man this track is confusing in first-person! After the incident my camera was all scuffed up and I was af…
May 23
DIY Robocars via Twitter
RT @circuitlaunch: Loved seeing so many familiar (masked) faces at Circuit Launch today for our first in person @diyrobocars in over a year…
May 22
More…