Which radio controller?

Ok so I'm close to taking the dive and getting one of the Easy Stars I seen at my local rc shop. The first basic question is what kind of radio controller to get? Go with a bare bones one or is it better to get a good one for when I advance to the whole auto pilot part of this project??

Also, can the average computer literate guy with a small amount of programming knowledge get this the autopilot up an running successfully? I just don't want to jump in and find I'm in too deep... 

Thanks,

J

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • I got the Futaba 7c 2.4ghz from towerhobbies, which is the one they recommend in the ardupilot blog. Towerhobbies also offers easypay options on their radios so may help you get something a tad better. I have been very happy with the radio so far, I was going to go the route like the radios you can get from hobbyking but everytime I have tried to order from them I run into some kind of issue and have given up on that company all together. Also I would rather pay a little more and not have to wait so long on shipping and a easier means of contact if something goes wrong. Hope this might help some
  • On the controller, just don't go cheap like the HobbyKing or anything crazy like that..it is a good controller for certain situations (like the Blimpduino), but this is not it. You will want a good 6 channel Tx/Rx combo (some are not interoperable even among brands.) Units from the big brands like Futaba, JR, Spektrum, Hitec etc. will usually have decent support, although you should keep an eye out for the frequency range of the transmitter, and even for discontinued models.

    And ABSOLUTELY a computer literate guy with a little programming knowledge can handle the Ardupilot - in fact you may actually find it sharpens your skills!! Besides, what fun is it playing in the shallow water?? - You have this entire community here to help sort things out...and they WILL be here to help!
  • Yes, you should get a better what means also more expensive radio controller. But if you're going to get something like Futaba 7 channel Radio controller, it costs 350$ if I remember right, but if you have money, it's okay then. But if you do not have money, Futaba 6 channel Radio controller is good enough too. Most have 6 or 7 channel now days, so it's okay to get a better if you're going to take this more seriously.
  • answer to you second question(can a computer literate..) is YES , once you know how to swim, it wouldn't matter how deep it is.;-) but go for some decent Rc controller(6 or7 channel) so that you wouldn't grow out of it soon. good luck
  • I would go with a more advanced controller if you are using the whole autopilot system just because advanced controllers give you safer control. But you also have to think about if your going to want to continue(I'm assume this might? Be your first plane) flying planes or if this is just a test drive. I think it really depends on how serious you want to take this. If you are going to take it seriously, then go ahead and buy a nice controller. Like a nice futaba.
This reply was deleted.

Activity

DIY Drones via Twitter
RT @Struktur3D: We have just posted on @DIYDrones for the first time in a long time. Continuing with our search for a #lasercutting service…
yesterday
DIY Robocars via Twitter
RT @chr1sa: The dev team is having fun with virtual @DIYRobocars track generation with Unity on the @donkey_car discord: https://t.co/l0Jd9…
Wednesday
DIY Drones via Twitter
Review of the new Nivida Jetson NX for robocars https://t.co/bWjd3sH2o4
Tuesday
DIY Robocars via Twitter
RT @chr1sa: My review of the new @NVIDIAEmbedded Jetson Xavier NX in robotics and @DIYRobocars applications https://t.co/O7TfJZhiF9 https:/…
Monday
DIY Drones via Twitter
RT @chr1sa: Somehow I missed this, but last week @Nvidia released a new version of its Isaac robot development framework. Lots of new Lidar…
Monday
DIY Robocars via Twitter
RT @Smartphone89: DonkeyCar Racing League Korea #donkeycar @diyrobocars https://t.co/mDlHDR1d98
May 29
Jørn Ramnæs liked VIDEO LINK's profile
May 28
Mark Harrison left a comment on Moderators
"Wow, Ning2 looks really great on mobile. I had sort of drifted away as my browse-time went more on my phone, so this is great."
May 28
DIY Robocars via Twitter
https://t.co/rLmFr8M2UK
May 28
DIY Drones via Twitter
Welcome to the new DIY Drones design!. You may have noticed that DIY Drones looks a little different today. That's… https://t.co/cg2EmeDGMQ
May 27
DIY Drones via Twitter
New! Online Training on Drones for Disaster Response https://t.co/brqRuujjY2
May 26
DIY Robocars via Twitter
https://t.co/8EMCvYW6oz
May 25
DIY Robocars via Twitter
RT @OttawaAVGroup: We are going to try something new this week. We will be having a drop-in style meeting Wednesday @ 7-9pm EST. Pop in and…
May 25
DIY Robocars via Twitter
RT @tawnkramer: Thanks Everyone for another fun virtual race! Amazing Ai racers competing head-to-head, Virtual Makers Fair event. Catch us…
May 23
DIY Robocars via Twitter
RT @make: Find out the latest from @diyrobocars at 10am PT from @chr1sa of @3DRobotics on Virtually Make Faire! #makerfaire #maketogether #…
May 23
DIY Robocars via Twitter
RT @Heavy02011: Join us Saturday online: Virtual Race League: @DIYRobocars Race #2 - Parking Lot Nerds https://t.co/aJUu4sdutx #Meetup via…
May 22
More…