Replies

  • Developer

    If you need longer range and mesh support you can take a look at jDrones long-range telemetry. You can upload mesh software on these modems and it works 101% on them. Why?? Well Seppo/RFD who made these modems also helped to develop mesh software that we are talking in here. 

    We also have custom pixhawk cables for the modems if you need. 

    jD-RF900 Longrange telemetry set
    Long range telemetry set for all your UAV and UAS needs
    • Is there any information available (link) on the mesh network firmware for the rf900 radios?
  • no problem with any radio I am using now. setup the radio test it with terminal window on both xbee type text in both window should apare on opposing terminal window using a PC or MAC. 

    • Alright. Thanks so much for the information. Can I get back to you if I need any more help?
      • sure!

  • hello,

    use series 2 2.4 

    • After I set up the xbee by following the instructions. Do I have to program the qgroundcontrol or pixhawk?
      • radios are one time setup nothing to do on the FC side at all!

  • May I know what xbee model are you using. I'm bought the xbee series 2
  • info is here 

    http://copter.ardupilot.com/wiki/xbee-radios/

This reply was deleted.

Activity

Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
More…