Hello Everyone,
If i'm flying a plane w/out a rudder, I could hook up the rudder to a PTZ camera(pan). This of course would work just fine for panning the camera.
Hi all,
I need to compute each euler axis from the DCM matrix of the APM. But I'm not really sure of the way to do that...
First, the axis are :
- X forward
- Y to the right wing
- Z to down
So it's a right handed system, don't it ?
Finally I'd like to
Read more…I developed my own autopilot (more an enanched fly by wire actually,still developing) with an arduino pro because the first ardupilot just used few channels. Now I wish to use the APM as harware board for my project and make it fuse with APM firmware
Read more…Hi all,
Well I had my first successfull flight with APM this morning, tested Stabilise, and FBW-A with no dramas and only some minor adjustments, but have been having issues getting the APM Mission planner to work correctly. When ever I try and write
Read more…I found I still have issues and questions with taking photos at waypoints with the APM platform. Please use this discussion to build up our collective knowledge.
The issues that I feel need improving are:
Blurry photos (from motor vibrations or quick
We're a group of 3 senior computer engineering students and we're thinking of using Arducopter as platform for a class project. We want to build a prototype for what we call a "Power Line Analyzer". This power line analyzer would be an autonomous qua
Read more…Hello everybody,
I am up to buy a HMC5843 to DIYDrones shop (for my APM), but it is still out of stock.
Does somebody know what appens with it ?
Best regards,
Gilles
Read more…
Quick question regarding the APMega and Oilpan shield combination - can't see it clearly in the circuit diagrams.
Can power the combination with the usb connector for low current use such as programming without servos connected.
Can power from the boar
Read more…I am going to be flying my arducopter mostly at a friends land in the country. Sadly there are a few old, probablly debunked airstrips around his land. These airports are registered and have a rating for no more than a single engine plane and neith
Read more…I am setting up a APM with a F27 Stryker that uses elevons. I am working with code revision APM 1.0 Public Beta. I have everything working well in manual mode and I used the reverse dip switches to get the controls to react properly to the transmitte
Read more…Hi,
Hello everybody,
I have read about ardupilot and how it works. I would like to dvelop a pilot for a sailing vessel.
There are several points that make me doubt about using ardupilot, but maybe you can resolve them:
Hai..
Hi
I like flying fast rc models, can you please tell me the max speed a model can still be stabilized with the Ardupilot mega?
Read more…Hi there,
I was trying to use Ardupilot (2.7 software version- latest from the server), with Ardushield V2 (airspeed sensor and thermopiles (including the Z sensor).
I successfully flew this setup with Ublox GPS. I wanted to make a change and explore t
So the other day I had a dream. It was an exciting dream, but a dream none the less. I was reserved to my quiet resignation about realizing said dream when I happened upon a video on youtube. It was of a young gentleman in Austria flying an RC from t
Read more…I am working with the Ardupilot Mega with a 3S lipo and I am trying to get the battery voltage to display in the telemetry. Currently all I am able to get is "Low Battery!" but the battery is fully charged. I soldered the 3.9k resistors in the 1,2 an
Read more…hii
i'm still have the same problem with my arduimu v2 ,, the blue led didn't flash and didn't locked although i conect it with ublox ..
some one can help me to find the problem ??
and how i can to verify my ublox configuration ??because i buy it from
Read more…Hi there,
I have a question regarding the GPS for the ArduCopter
I already have the GPS50 Channel GS407 Helical GPS Receiver and uBlox Adapter,
it theresomething to say why I shouldn't use it for my ArduCopter ? (I know, have to mount it diffrent...
