Hello everyone! Recently caught myself thinking that time is merciless, it's consumed by tasks, work, family. And I have no hobbies left. Absolutely none, except PC and mobile games, Aviator of smth like from this. Can you suggest what you do in your
An issue with reading data from the telem1 port of CUAV-X7+ I am trying to integrate KingTech 210 ECU with Ardupilot firmware. The above .jpeg file explains the flow of my code. I made a library in the libraries dire
for a monowing project I wrote several FreeCAD macros which generate a tapered, two section wing, where the root profile of the inner section is different from the outer profile of this section and where the outer section is tapered towards th
Integrating embedded Field Programmable Gate Arrays (eFPGAs) into drones can enhance their capabilities and efficiency in various ways. Here are some potential applications:
Each button on the remote control corresponds to different functional commands, and some buttons can be customized or have dual functions. Below,taking the EFT App paired with the MK15 remote control as an example to show how to set the functional ch
recently I found the flopbot project, where they have built and flown a monocopter. Has anyone tried a monocopter of their own or to replicate the flopbot? Any insight or experience you could share would be highly appreciated.
As a crucial component of multi-rotor drones, the motor system has strict reuiqrements on horizontal accuracy. Even minor installation errors or loose parts can affect flight stability.Therefore, regular pre-flight calibration is essential to ensur
As a crucial component of multi-rotor drones, the motor system has strict reuiqrements on horizontal accuracy. Even minor installation errors or loose parts can affect flight stability.Therefore, regular pre-flight calibration is essential to ensur
In an era where renewable energy is paramount, Upteko has positioned itself at the forefront of innovation within the wind energy sector. Through strategic collaborations with leading service technolo
I have been always active in fixed wing. One of my friends asked me to look in, the chances a quadcopter can survive a defect engine, or motor controller ?
The Frame should carry a 5kg sensor package, so, we are talking about a pretty heavy machi
We are trying to get a Hexacopter (Tarot X6 frame) with a Pixhawk Cube Orange+, Arducopter v4.5.1, Castle Creations DMR 30/40 ESCs and Tarot 5008 KV:340 motors, 18in CF props, in flight condition.
The only thing that is non-standard, is we have a 2 ½
I took my Tarot 650 Sport quad out for a test flight today. It seemed to fly okay though yaw control is very quick and I need some practice holding the same altitude. After a minute or so of flying I switched flight modes to RTL. The aircraft flew to
The drift rate on internal gyros has been reduced since the first generation Pixhawk, and the extended Kalman filter has been improved. How has this effected the ability of a plane to follow routes? How often does it need GPS in order to keep flying