Will this app work with one of these little cheap Bluetooth adapters? I haven't even checked to see if this can be connected to the APM, but I used it with a multiwii android app running on my nexus and it worked great. Thanks!

Views: 234

Replies to This Discussion

Yes, all cheap bluetooth module work fine with APM, but this one is for 3.3V input, APM telemetry voltage output is 5V, require a voltage drop and this setting: 57600,8,1,n.


I browsed through the pictures of this ebay-item, on the backside of the board there is text VCC 3.6---6, it would indicate voltage tolerance up to 6V ??  Or not? I have I similar board with the same texts but have not connected it yet so I'm curious...

see http://robotosh.blogspot.ca/2012/07/arduino-jy-mcu-bluetooth.html for some info on that Bluetooth Module.

It looks like it has a small voltage regulator on board, and some a series resistors in-line of tx from the Arduino to drop the voltage below 3.3V.

I meant to add that it should work fine with 5V of the APM.

 [x] Hope bluetooth support will be added soon :-)

The app seems to be great, but i can't use it because i've Xbee. Thanks for your development!

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service