iskess's Discussions (1,113)

Discussions Replied To (115) Replies Latest Activity

"There is an auto trim parameter. Use this to automatically set your trims for the Pi…"

iskess replied May 21, 2016 to Should One Re-Calibrate After First Flight?

5 May 21, 2016
Reply by Christopher Rice

"This has been long discussed in many threads but I don't know the reason why Plane s…"

iskess replied Feb 27, 2016 to Setting home

4 Feb 28, 2016
Reply by Anders Wikstrom

MR60

"The vibration shouldn't be an issue on a fixed wing."

iskess replied Feb 12, 2016 to Help to interpret log VIBE & PID pitch tuning

2 Feb 14, 2016
Reply by Hugues

"Try using a 3S battery and see how the power is. If you need more try a Slow Fly 12x6"

iskess replied Feb 11, 2016 to Skywalker 2015 - Assymetric turning in AUTO Mode resulting in tip stalls

17 Jun 28, 2016
Reply by Tatich

"Jeff, What prop and KV did you choose for the E384?"

iskess replied Jan 31, 2016 to Skywalker 2015 - Assymetric turning in AUTO Mode resulting in tip stalls

17 Jun 28, 2016
Reply by Tatich

"I believe the issue is spiraling slipstream on the tail, so I don't think shims will…"

iskess replied Jan 29, 2016 to Skywalker 2015 - Assymetric turning in AUTO Mode resulting in tip stalls

17 Jun 28, 2016
Reply by Tatich

"Does the plane always track to the right of the course when flying the grid? If do,…"

iskess replied Jan 29, 2016 to Skywalker 2015 - Assymetric turning in AUTO Mode resulting in tip stalls

17 Jun 28, 2016
Reply by Tatich

"My understanding and experience is that TRIM-ARSPD is not used unless there is an ai…"

iskess replied Jan 21, 2016 to TRIM_AIRSPD_CM and TRIM_THROTTLE Parameters

9 Feb 6, 2016
Reply by Jacques Eloff

"There is not air moving through the tube, it's just getting compressed with the ram…"

iskess replied Nov 18, 2015 to Airspeed sensor tube, does length matters?

8 Nov 19, 2015
Reply by Francisco Gonzales

"I'm sorry, I only have experience with DragonLink LRS and the sync time value is som…"

iskess replied Oct 11, 2015 to Why is the remote control of RC model so sluggish with latency with use of APM?

18 May 8, 2016
Reply by Simon Woywod

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service