It was a horrible crash with pixhawk and my new airplane. I dont get the reason. airplane get into spin and no response, and it wass too far to make a manuel control. it crash to a golf club almost make big damage.

Some one can help me with the log ?

a crash bin log

Views: 478

Replies to This Discussion

I'm sorry to hear that, I have been watching the crash list of APM for a while before I invest in a new skywalker 2013 and fit APM in it, Its a shame to hear about so many crashes, 

All (or most ) of the ones that I have seen seem to be either stall related or the plane gets into a spin and takes a dive.  

If someone can confirm that people are doing things wrong maybe there should be a sticky made to help us all prevent it. 

Im glad no serious damage was done, sorry I cant help you with the log, 

Can you upload the flight's telemetry logs? This resembles the "toilet bowl" affect caused by compass interference.

Thanks a lot for the help, I can not fly before I find out the reason.

Here is the Tlog, just need to see from 90% of the log to the end. the beginning part is other flight before.

I am using pixhawk onboard compass, I did not connect 3DR GPS compass module. It is better use that compass module ?

One more question, why you need check Tlog? I suppose bin log on board have complete information, am I wrong ?



I do not see the compass interference problems like those described at , but your problem sure resembles compass interference as described in the docs.

Hopefully someone else can add some analysis to the discussion.

I wanted to look at the tlogs only so I didn't have graph in Excel.

Dataflash log’s COMPASS message hold the compass’s raw x, y and z axis values (called MagX, MagY, MagZ) which are equivalent to the tlog’s RAW_IMU xmag, ymag and zmag fields.  It’s possible to calculate the mag-field length by first loading the dataflash log file into excel, filtering by the COMPASS message and then calculating the mag-field using the formula mag_field = sqrt(MagX^2, MagY^2, MagZ^2).  Note that the COMPASS message is not enabled by default in the dataflash logs because it runs at 50hz and does affect CPU performance a bit.


Thanks for explanation. hope someone can help me to do some analysis on this issue.

another is that GPS+compass module will be better than pixhawk on board compass ?

Please someone do help....pixhawk, with APM I never have this problem...



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service