David Boulanger's Discussions (427)

Discussions Replied To (10) Replies Latest Activity

"Tlog will be on your computer if you have flown while linked to Mission Planner via…"

David Boulanger replied Apr 6, 2017 to Using ALT HOLD with a helicopter

9 Apr 6, 2017
Reply by David Boulanger

" Also a number of autonomous test flights can be watched on youtube.  SWF Drones is…"

David Boulanger replied Apr 5, 2017 to Using ALT HOLD with a helicopter

9 Apr 6, 2017
Reply by David Boulanger

"I have not tried simple mode.  I fly a 600 size Heli on 3.2.1.  Low head speed, spin…"

David Boulanger replied Apr 5, 2017 to Using ALT HOLD with a helicopter

9 Apr 6, 2017
Reply by David Boulanger

"I run mine at .3 .  Try it with more altitude and be ready to switch back to stabili…"

David Boulanger replied Apr 4, 2017 to Using ALT HOLD with a helicopter

9 Apr 6, 2017
Reply by David Boulanger

"Try turning down your THR_ACCEL_P.  What is it set at now? "

David Boulanger replied Apr 3, 2017 to Using ALT HOLD with a helicopter

9 Apr 6, 2017
Reply by David Boulanger

"Here they are . David"

David Boulanger replied Apr 22, 2015 to Trex 500 Parameters

2 Apr 22, 2015
Reply by David Boulanger

"Greg,  here is mine.  I have a T Rex 550 that has been stretched to a 600.  I have h…"

David Boulanger replied Apr 22, 2015 to Trex 500 Parameters

2 Apr 22, 2015
Reply by David Boulanger

"Greg,  I've been using the PPM encoder with my AR8000 receiver for some time and all…"

David Boulanger replied Apr 22, 2015 to Problem with RC Channel Mapping

4 Apr 22, 2015
Reply by Greg

"Greg,  I use Spektrum recievers and just had to swap a few wires with the PPM encode…"

David Boulanger replied Apr 22, 2015 to Problem with RC Channel Mapping

4 Apr 22, 2015
Reply by Greg

"Thor, In my opinion yes.  I have had mine mounted both under the blades and on the e…"

David Boulanger replied Dec 27, 2013 to Does the GPS (and compass) need to be entirely out from under the main blades?

7 May 18, 2014
Reply by John Bond

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service