Dan McKenna's Discussions (46)

Discussions Replied To (40) Replies Latest Activity

"I am at almost 6000' near the top of Palomar Mountain California."

Dan McKenna replied Sep 4, 2015 to white IRIS...cooler IRIS?

16 Sep 9, 2015
Reply by Alasdair

"I here: The drone flies well which points to the gimbal...yes? "

Dan McKenna replied Apr 29, 2015 to Gimbal still jerking after firmware, re-calibration, motor, the works

12 May 1, 2015
Reply by Heller Gregory

"If it is not a calibration issue then it might be a hardware problem like the positi…"

Dan McKenna replied Apr 29, 2015 to Gimbal still jerking after firmware, re-calibration, motor, the works

12 May 1, 2015
Reply by Heller Gregory

"Thank you Nick! My current drone is my own because I thought our department would m…"

Dan McKenna replied Mar 5, 2015 to Research using IRIS..not allowed!?

58 Mar 6, 2015
Reply by Nick Turner

"So my flights are 15 minutes, thus 60 hours is 240 flights and I guess that the Hugu…"

Dan McKenna replied Mar 3, 2015 to Lubrication..every 6 flights?

51 Mar 4, 2015
Reply by Andy Windle

"Just got a reply from 3DR "In regards the motor lubrication; unfortunately we have n…"

Dan McKenna replied Mar 2, 2015 to Lubrication..every 6 flights?

51 Mar 4, 2015
Reply by Andy Windle

"At conferences I go to, when a group explores a subject often times, a good deal of…"

Dan McKenna replied Mar 1, 2015 to Lubrication..every 6 flights?

51 Mar 4, 2015
Reply by Andy Windle

"That said, as long as you can point out that you are in fact intending to fly below…"

Dan McKenna replied Feb 28, 2015 to Research using IRIS..not allowed!?

58 Mar 6, 2015
Reply by Nick Turner

"Tom, Thank you for your thoughts. Dan "

Dan McKenna replied Feb 28, 2015 to Research using IRIS..not allowed!?

58 Mar 6, 2015
Reply by Nick Turner

"In my case a flying thermometer........I won't go there"

Dan McKenna replied Feb 28, 2015 to Research using IRIS..not allowed!?

58 Mar 6, 2015
Reply by Nick Turner

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service