Hey everyone, I had a bad crash yesterday. One of the motors came out of the Iris and the whole unit plummeted to the ground. HERE is the video of the crash...The unit is thrashed and the gimbal broke off even though it never hit anything. After inspecting the quad, I found that the screws that held one of the motors in had fallen out!  Upon further investigation, I found that only about half of the screws in the other motors had threadlock on them. Anyone else experience this? I am going to call 3D Robotics to see what can be done on Monday.

Thanks all!

Views: 1417

Replies to This Discussion

I called and Angel (3dr) is setting me a free set of screws for my Iris.  I've had no problems and mine are tight, but I think it's worth putting in longer screws just in case.

So after THIS happened, I contacted 3D Robotics and I have to say that they were great to work with! They have really helped me out with my Iris...  Thank you guys at 3DR!

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service