[Update: Apr-17-2012]

I have a working library for initializing AT-command compatible modems for TCP/IP over cellular.

Details:

Protocols: TCP and UDP (both work)

Mode: Transparent Bridge

Rate: 57600 baud

GCS tested: MP and QGCS

HW: APM1 tested, (APM2 testing soon)

Modems Tested: DroneCell (SIM900D module) and Arduino GSM Shield (SIM900 module)

Development continues...

Views: 7837

Replies to This Discussion

For the moment I just want to make it work. I have not done much programming, so I am totally black here. I do fly a lot though, so I'd be happy to beta test whatever needed. 

This code that Kuula linked to, is this something "everybody" is working together on or is there multible solutions been made with regards to the dronecell?

Søren kuula : nice work, did you consider to get it inegrated to Pixhawk and/or added to the master git ?

Also, I can compile Søren Kuulas ardupilot-MobileTelemetry APMrover2, but when compiling his Ardupilot I get this error message; 

avrdude: verification error, first mismatch at byte 0x3e000
0x91 != 0x0d
avrdude: verification error; content mismatch

Can someone help me with this? I can compile the lastest original code, both i Arduino and Mission planner.

Does anyone know where I can find the code and hex files for Drone Cell / APM 2.5 for Ardu Rover?

Thank you

Richard

Any further Dev on this?

It would be possible using this module to work but not using internet? Do a data call from computer to ardupilot and uses COM port from computer side to communicate to COM apm internal port.

I had some research but not find something, INMO this way is safer than exposing drone whole internet.

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service