Hello,

Using a M210 RTK, is it possible to add the correction of the base position of DJI RTK differential antenna?

We use a GNSS NMEA base antenna to verify the DJI base error. We would insert this difference in order to save the right data on the EXIFs.

Thanks.

Views: 65

Replies to This Discussion

If you connect the base unit to the DJI assistant 2 you would be able to input the Long, Lat and Alt of the unit. The problem is that the antenna has an offset depending on the heading of the unit. So if there is a way to consistently place the device then yeah.

You would also need to figure out the internal offset distance of the camera from the RTK antenna of the drone. This is because the RTK was meant for more of a relative positioning system than an actual precise measurement system.

Good informations, thanks.

I will try to follow your advice.

Cheaw Wen Guey said:

If you connect the base unit to the DJI assistant 2 you would be able to input the Long, Lat and Alt of the unit. The problem is that the antenna has an offset depending on the heading of the unit. So if there is a way to consistently place the device then yeah.

You would also need to figure out the internal offset distance of the camera from the RTK antenna of the drone. This is because the RTK was meant for more of a relative positioning system than an actual precise measurement system.

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service