mavic pro zoom record video around route stop and turn and control zoom level

Hi

Is there a way to have the drone continue to record video (it stops right now) as it goes through a stop and turn?

How is the zoom value controlled with UgCS for a Mavic Pro Zoom?

Thanks...

Views: 69

Replies to This Discussion

Hi Mike,

If you are flying simple waypoint mission, camera action is valid till next waypoint with camera action. If you are performing Area scan or Photogrammetry mission, "Action execution" for route has to be set to "Forward passes"

Camera zoom control is described in UgCS Wiki section: https://wiki.ugcs.com/Actions#Set_camera_attitude_/_zoom

Best regards,
UgCS Support Team
Janis Jonins

Hi Janis

Thanks for the info.

From the wiki, it states 

"In UgCS for DJI the value of zoom level is displayed between zoom buttons. This value varies for different DJI cameras according to camera value range. Therefore, before defining the Set camera attitude action value, check the border zoom values of the camera. The Zoom settings of UgCS are limited by optical zoom range of particular camera."

When controlling the zoom with UgCS for DJI on my Mavic 2 Zoom, I get values of something like, 38mm". What does this map to in the UgCS mission editor?

Thanks...

Hi Mike,

38mm is focal length, this value has to be set in UgCS Mission editor, camera action "Zoom" field.

Best regards,
UgCS Support Team
Janis Jonins

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service