I am using following code on the .net SDK, trying to send the Phantom 3 simulator to a home point of lat/long/alt {0.0,0.0,0.0} before flying a mission.
Unfortunately, the UGCS emulator has a bug and will not return telemetry on Ubuntu when flying, a
Read more…Hi
I have a system composed of DJI N3 + LB2 + Remote Control Channel Extended.
The "Manual" shutter set in F1 works perfectly with Extender but I'm trying to make the remote shutter via PWM (always on F1) on UGCS but without success
Do you have any hel
Read more…I am attempting to use a joystick to control a DJI M600 with UgCS. However when I connect the M600 to UgCS via the UgCS for DJI android app no joystick control mode is available. Is joystick control for the DJI M600 not yet supported? Is this feature
Read more…I'm currently working on getting a Phantom 2 Vision Plus functioning properly with UgCS. I have been following all of the information available out there that I can find, but am still at a loss.
I am attempting to setup joystick control mappings for UgCS with a Speedlink Phantom Hawk. The joystick has a rotatable z-axis for yaw control but it is not detected by UgCS when I attempt to add a mapping. I have tested the joystick with other appli
Read more…We have a TurboAce Matrix with an A2 FC that we have just upgraded to lightbridge2. With the LB2 we need to connect via the UgCS for DJI app, is this compatible with the A2 flight controller?
Thanks.
Colin
Read more…We had an issue yesterday that I'm hoping someone will be able to help me with.
When trying to start a mission by activating Auto Mode we kept getting an "Altitude too high" error. It doesn't say what altitude it's referring to and everything we tried
Read more…Hello Everyone; I just joined the group, and would like to thank you for the great software, support, and for having me here.
As part of our pre-flight safety procedures, we first upload the planned route on to the flight controller (this is done, dep
Read more…Hi Guys,
I am having problems uploading a mission from UgCS to my flight controler. I managed to connect without problems, but the telemetry data seem to be incomplete and the altitude is wrong. The upload button is also greyed out. Are there other
Read more…Hi everyone,
I have always wanted to fly my Mavic Pro using my existing Surface 3 LTE and was disappointed by DJI not providing a solution for Windows tablets.
So I was pretty thrilled learning about UgCS and have done some testing in the last couple
Read more…Hello friends,
I'm planning a simple route using way points, with my matrice 100.
There is a way to make the speed of yaw change slower?
Read more…Trying to install Vers. 2.12 I receive an error:
Faild to run a post-install Service. Unknown error while running C:\program Files\UgCsBeta\java\java.exe-jar../../tools/unicode-escape/unicode-escape.jar -encoding utf-8../../server/ucs.properties ../..
We fly a Matrice 600 and we usually start a mission by powering the UAV and checking all parameters in the DJI Go app then switching to the UgCS for DJI to fly the mission. UgCS has a return to home altitude in its route creation screen. There is als
Read more…It would be very important (for me) to have the ends of each transect in the area scan use the 'stop and turn' functionality, and the interior waypoints (added by UGCS to maintain constant AGL) use 'adaptive banked turn'. The reason this is important
Read more…I'm not sure if this is a setup issue or what but I'm about to pull my hair out. I have a Samsung Galaxy Tab S2. I have tried every which way I can think of to run the UGCS for DJI on my Android but I haven't been able to get anything but a white o
Read more…I recently got a DJI A2 controller and I am having an issue with getting UGCS to receive telementy. In paticular the Altitude is not working. I also have a NAZA and I don't have any issues with it working.
I have verified that the A2 is working becaus
Read more…I can connect to an APM2 using a 3DR on COM4. Mission Planner works fine and will successfully upload a route. UgCS connects also and receives messages. Everything appears to work fine but UgCS is unable to upload a route and terminates with an error
Read more…I have evaluated UGCS for use with fixed and rotary wing UAVs for my research project. We are developing lightweight SDR based GPR for arctic and alpine survey work - glacier studies and avalanche prediction. This is a project that will likely have l
Read more…Hello,I would like to try the open version with my phantom 3 advanced. I set the initial parameters, the profile of the vehicle (dji phantom 3 adv) and created a very simple mission with 7 waypoints. However, I can not upload because I do not see the
Read more…i flew a mission and changed batteries and shutdown my laptop.
When i started up UGCS again i would get the error message
'ugcs server process stopped unexpectedly' and it would not connect.
i sent the next hour and a half uninstalling/reinstalling and
Read more…